5610 cutting brush.

   / 5610 cutting brush.
  • Thread Starter
#11  
This is the area that I am cutting.

View from the top of the dam, looking south.

P4010060.JPG

Some before and after shots, looking out the windshield at the front mount mower.

P4010069.JPG P4010071.JPG P4010072.JPG P4010074.JPG
 
   / 5610 cutting brush. #13  
Are you going up and down, angled or sideways? Often my problem is, if I have a runaway or slide going up and down, I have no landing zone at the bottom.

That's a nice job.

May GOD keep you safe
 
   / 5610 cutting brush.
  • Thread Starter
#14  
Are you going up and down, angled or sideways? Often my problem is, if I have a runaway or slide going up and down, I have no landing zone at the bottom.

That's a nice job.

May GOD keep you safe
Thanks.

I was going sideways on the dam. Got some much needed rain, so have to wait til it dries before I can mow some more.
 
   / 5610 cutting brush.
  • Thread Starter
#16  
Finished cutting brush in the low meadow today.

Going down the back of the dam.
P4120002.JPG P4120004.JPG

Thick brush and cedar trees. The view out the windshield.
P4120008.JPG P4120009.JPG P4120010.JPG P4120011.JPG

Backed up to show the cut.
P4120012.JPG

Before, see the brush in the upper left.
Before.JPG

After.
P4120020.JPG
 
   / 5610 cutting brush. #17  
Looks good. Now what are you going to do with it?
 
   / 5610 cutting brush. #19  
What about the cleared ground?
 
   / 5610 cutting brush.
  • Thread Starter
#20  
Hope the grass grows, horse pasture.
 

Tractor & Equipment Auctions

2018 Toro Z-Master 6000 Series 74in Zero Turn Commercial Mower (A55787)
2018 Toro Z-Master...
2023 54' Hooklift Dumpster 20 Cubic Yard (A53422)
2023 54' Hooklift...
2020 FREIGHTLINER CASCADIA 125 SLEEPER (A54607)
2020 FREIGHTLINER...
(2) CAM2 HI TEMP LITHIUM COMPLEX GREASE DRUMS (A54757)
(2) CAM2 HI TEMP...
Galvanized Livestock Gates - 4FT x 18FT (2x Gates) (A55218)
Galvanized...
49" X 79" EXPANDED METAL RAMP GATE (A54756)
49" X 79" EXPANDED...
 
Top