Backhoe Long Backhoe 1199A Manuals

[Coffeygrounds]

Hello,

I have a Long backhoe, and I'm looking for any manuals for it. I've searched the internet and can't find anything. Does anyone know where I can find some or have any suggestions where to look?

Thanks!

 

[ctlguy]

Don't take my word for it, continue to ask around, but I believe Long is a long defunct company (pun intended). Although an industry leader in the early backhoe att days. When repairing cylinders, etc on these units I have taken to just matching up the components at hyd repair shops. If that is what you are doing. As far as operational type info I can be of no help. Good luck

 

[teg]

Sorry no manual, but let me know if you find one What size tractor is it attached too?

 

[Steve Bosshard]

Well poooey. Hope a manual shows up. I will be glad to pay printing cost, etc. Because - I just found a Long 1199A at Tri Counties Diesel at The Grove (really nice injector pump service folks) for $1K yesterday. Everything works - needs lots of new pins and sleeves and O rings in some cylinders replaced. It runs off the hydraulic remote on my IH806. First experience with a backhoe - the education begins. Steve near Waco.

PS - if you remember my tribulations with low oil pressure on the IH1086 - I drained 6 gallons of oil last Friday from a 4 1/2 gallon crankcase - and the 20 hour old oil was really thin - hope a rebuild on the pump solves the problem - tractor runs OK otherwise - sb

 

[doubleh]

Well poooey. Hope a manual shows up. I will be glad to pay printing cost, etc. Because - I just found a Long 1199A at Tri Counties Diesel at The Grove (really nice injector pump service folks) for $1K yesterday. Everything works - needs lots of new pins and sleeves and O rings in some cylinders replaced. It runs off the hydraulic remote on my IH806. First experience with a backhoe - the education begins. Steve near Waco.

PS - if you remember my tribulations with low oil pressure on the IH1086 - I drained 6 gallons of oil last Friday from a 4 1/2 gallon crankcase - and the 20 hour old oil was really thin - hope a rebuild on the pump solves the problem - tractor runs OK otherwise - sb

Do you still need a manual. l have a 1199A and have a manual l just have to find it. Reply to harcourt@bellnet.ca

 

[doubleh]

Hello To all. Please note l have obtained a parts manual and have scanned and emailed a copy to several people. If looking for a copy of the parts manual, send an email to hharcourt20111@hotmail.com and l will forward a copy. Still looking for my operators manual.

Regards

DoubleH

 

[doubleh]

Have parts manual if interested. send email to hharcourt20111@hotmail.com

DoubleH

 

[doubleh]

Hello Have parts manual if interested, send me your email address and l will forward

hharcourt20111@hotmail.com

DoubleH

 

[Buchcat]

Hello,

I have a Long backhoe, and I'm looking for any manuals for it. I've searched the internet and can't find anything. Does anyone know where I can find some or have any suggestions where to look?

Thanks!

http://www.google.com/url?sa=t&rct=...hIDIBg&usg=AFQjCNHyGHBHm-rhxIZ6RldLIJDlfKx_Kg

 

[Buchcat]

anyone needing info contact me, I rebuilt mine completely, new cyl, hoses, welded new plates, pins, bushing, etc.. and I found the manual free online. http://www.google.com/url?sa=t&rct=...hIDIBg&usg=AFQjCNHyGHBHm-rhxIZ6RldLIJDlfKx_Kg

 

[Buchcat]

http://www.google.com/url?sa=t&rct=...hIDIBg&usg=AFQjCNHyGHBHm-rhxIZ6RldLIJDlfKx_Kg

 

[danny11b]

anyone needing info contact me, I rebuilt mine completely, new cyl, hoses, welded new plates, pins, bushing, etc.. and I found the manual free online. http://www.google.com/url?sa=t&rct=...hIDIBg&usg=AFQjCNHyGHBHm-rhxIZ6RldLIJDlfKx_Kg

I need a diagram/blueprint of the part that stabilizes the 3 point backhoe to the toplink. and a hyd resivour/pump assembly.