dim
New member
Does anybody out there know any thing about this tractor CAST 435L
Last edited:
italian cast vinyard tractor
- Thread starter dim
- Start date
- Views: 19834
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,586
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
Can you provide a little more info? What tractor in particular? Most vineyard tractors are made in Italy for all the OEM's.
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,586
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
I have never seen one of them around this area or even heard of that brand before. Is this something your looking to buy? Parts support would be a nightmare here in the USA.
Why did you take my signature and turn it into a comment about us guys from NY?
shortthrow50
Platinum Member
- Joined
- Jan 12, 2012
- Messages
- 930
- Tractor
- 2012 John Deere 3520 Deluxe Cab
k0ua
Epic Contributor
Why did you take my signature and turn it into a comment about us guys from NY?
Robert, I think since he is so new, he misunderstood your signature line as a comment towards him.
James K0UA
Robert, I think since he is so new, he misunderstood your signature line as a comment towards him.
James K0UA
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,586
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
I took it as a insult so I returned it to you. I'm trying find someone who knows about the CAST. I have one and don't know what to do with it save it, junk it or sell it. Since my first reply I've found out there were 4 model of the CAST tractor. All totaled 250 made. Cast brand means CASARALTA TRATTORI made in Bologna Italy.It may be. Kind of rude though
shortthrow50
Platinum Member
- Joined
- Jan 12, 2012
- Messages
- 930
- Tractor
- 2012 John Deere 3520 Deluxe Cab
dim said:
Hahahahaha
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,586
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
dim said:
Good luck with your tractor then
DenNMs
New member
Dim,I know about them as I used to own one.a 435.Did quite a bit of work on it.
Antique Power
New member
DenNMS - I'm writing an article about a CAST 435L for Antique Power magazine (for whom I work as managing editor). After days of research, I'm still finding very little about this machine. Would you mind being a source for my article? I would just need to work with you by email or phone to make it happen.
If anyone else can help with my research, I would appreciate hearing from them.
Please contact me through this forum.
Brad Bowling
Managing Editor, Antique Power magazine
DenNMs
New member
Brad Bowling,I would be glad to help you out with the Cast tractor info that I have.I need your email so I can reply to you.Denny
Antique Power
New member
DenNMs - Thanks for the super-fast reply. Can't wait to hear from a fellow Mississippian about this CAST tractor. I'm from Amory, about 2 hours away from you. Feel free to shoot me an email at brad@ertelpublishing.com. Brad
430L
New member
I have info on these tractors.
Eric Thompson
New member
Hi - I hope you are still monitoring these posts. I have a tractor similar/identical to yours & live in Brown County Indiana. I would like to find one for parts. I know some details about these tractors, having owned one for 20 years.
They were imported to US by a company in Indianapolis, several years ago I spoke to a guy who worked at the company who imported them (I don't remember the name of the company in Indy however). These tractors were imported in late 60's or early 70's, during the "longshoreman's strike" which tied up the ports & caused delays in shipments (this according to the man I spoke with). I also found reference to this tractor in a tractor encyclopedia, I have a photocopy somewhere in my files. I think the guy told me they imported maybe 1000 or 2000 of these tractors to the US. He said there was a large Gypsum mile/quarry in Georga that had several hundred at one time....
These are really cool & interesting tractors, I've used mine in the woods to skid trees and I have several attachments. The 3 point hitch allows most standard attachments work fine but you need a short drive shaft. Motori Salanzi engine, two cylinder direct inject diesel with 30 +/- HP. The engine is very easy on fuel and in the right soil conditions it really has a lot of grunt & pulls nearly as well as my 3710 Kubota.
The 4 WD system has front & rear differential locks, independent suspension, and the steering is reversed when you swing the seat around to the opposite direction, which is really amazing & well engineered. There are pedals for driving in forward or rearward direction, depending on which way you swing the seat. Crab steer. Each wheel is driven by a CV joint type axle, through a compound reduction unit at each wheel.
Parts are challengng to find & you need to be creative - the CV boots are similar to Audi 4000 & Audi 5000. The upper and lower ball joints are similar to Fiat & I have used Fiat joints with modification when needed (these are one of the weak links, as I have found out twice). The fuel filter is Mercedes I think.... other odds and ends are comon to European cars of the era. The guy who worked for the importer told me that some of the parts like the CV joints were comon with Porsche.... etc.
Mine still runs but nearly all the oil seals are shot & need replacement, the oil runs out of the axle stubs & transmission input shaft about as fast as you can pour it in. The brakes no longer work & electrical system (alternator, lights, wiring, etc) has never worked... so decided to retire it to County Fair duty & bought the 3710 Kubota for more practical (and safer, with ROPS etc!) day to day work.
I have the owners manual and tool kit for mine. Send me your e-mail address (mine is angmokuk@yahoo.com) and I will forward a picture if I can find one. Eric
They were imported to US by a company in Indianapolis, several years ago I spoke to a guy who worked at the company who imported them (I don't remember the name of the company in Indy however). These tractors were imported in late 60's or early 70's, during the "longshoreman's strike" which tied up the ports & caused delays in shipments (this according to the man I spoke with). I also found reference to this tractor in a tractor encyclopedia, I have a photocopy somewhere in my files. I think the guy told me they imported maybe 1000 or 2000 of these tractors to the US. He said there was a large Gypsum mile/quarry in Georga that had several hundred at one time....
These are really cool & interesting tractors, I've used mine in the woods to skid trees and I have several attachments. The 3 point hitch allows most standard attachments work fine but you need a short drive shaft. Motori Salanzi engine, two cylinder direct inject diesel with 30 +/- HP. The engine is very easy on fuel and in the right soil conditions it really has a lot of grunt & pulls nearly as well as my 3710 Kubota.
The 4 WD system has front & rear differential locks, independent suspension, and the steering is reversed when you swing the seat around to the opposite direction, which is really amazing & well engineered. There are pedals for driving in forward or rearward direction, depending on which way you swing the seat. Crab steer. Each wheel is driven by a CV joint type axle, through a compound reduction unit at each wheel.
Parts are challengng to find & you need to be creative - the CV boots are similar to Audi 4000 & Audi 5000. The upper and lower ball joints are similar to Fiat & I have used Fiat joints with modification when needed (these are one of the weak links, as I have found out twice). The fuel filter is Mercedes I think.... other odds and ends are comon to European cars of the era. The guy who worked for the importer told me that some of the parts like the CV joints were comon with Porsche.... etc.
Mine still runs but nearly all the oil seals are shot & need replacement, the oil runs out of the axle stubs & transmission input shaft about as fast as you can pour it in. The brakes no longer work & electrical system (alternator, lights, wiring, etc) has never worked... so decided to retire it to County Fair duty & bought the 3710 Kubota for more practical (and safer, with ROPS etc!) day to day work.
I have the owners manual and tool kit for mine. Send me your e-mail address (mine is angmokuk@yahoo.com) and I will forward a picture if I can find one. Eric
Dale Mercer
Bronze Member
I got my Cast restored. I have forks for 3 point lift and use it bring in fire wood and I love it. I had to find cv boots, four ball joints, fuel and oil, filters, and a new hood. I replaced all axel seals and rear transmission seal. The tractor has had power steering added. The 3 point moves slow needed a bigger hydralic pump to handle power steering and 3 point lift. My fuel pump has stared to drip fuel. I got a new one coming. I've found tractors with serial number as low as 004 and as high as 569
DenNMs
New member
Dale,Thanks for the update on your progress of your Cast.
Dale Mercer
Bronze Member
When I got my CAST it only had 217 hours . The tractor now has over 800 hrs on it. Been using it and enjoying it.
Sawyer Rob
Super Member
How about some picts., I've never seen a Cast tractor...
SR
SR
Here are some similar links:
