CompactTractorFan
Super Member
I would like to start a thread like "Today's Seat Time", but for projects that do not involve tractors. Example: home repairs, property care, gardening, equipment maintenance...etc...
Today's Project Time
- Thread starter CompactTractorFan
- Start date
- Views: 4452
Johndeere3720
Padawan Tractor Learner, Advertiser
- Joined
- Mar 14, 2009
- Messages
- 6,486
- Location
- NW Oregon
- Tractor
- Bobcat T650, MT55, E42R, E10, John Deere 4410, 4200, x500
It may be a little late, but yesterday, I did electrical work and some framing for a new storage room in my grandpa's barn. Sorry, no pictures, but I will try to get some soon. :thumbsup: I can say that the weather was cold and the lumber was sopping wet.
OP
CompactTractorFan
Super Member
Great, the first reply!!! :thumbsup: I hope this thread ends up being as long as "Today's Seat Time". (or Eddie Walker's lake thread :laughing
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 21,059
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
I replaced the diverter for the hand sprayer under my kitchen sink. The original was leaking at the sprayer connection and Price-Pfister sent me a replacement free under my lifetime warranty.
czechsonofagun
Elite Member
Deer jerky, today and tomorrow and who knows. I have 15 pounds mixed and curing and have to dry it.
scgargoyle
Gold Member
- Joined
- Dec 18, 2007
- Messages
- 396
Nothing too exciting- finished the tile backsplash in the kitchen (nothing like an impending holiday to get 'er done) and built a nice plywood box for my smoking wood after the beloved cardboard one fell apart.:laughing:
czechsonofagun
Elite Member
Build the second half of our club website, the private one. Since it is gonna rain today, seems like a good time.
Egon
Epic Contributor
Any chance of seeing the Recipe and how you dry the jerky? Thanks.
Today I'm gonna change oil in the truck and tractor. Replace the truck fuel filter and try and hook up the fuel water indicator. The parts have been sitting in the shop for two years now!
czechsonofagun
Elite Member
Good Morning, Egon:
It is quite simple actually. I use Hi Mountain mix, we like the mesquite the best but I experiment with other flavors too.
As far as drying and the production, I am still searching. I used to do muscle jerky, lot of work and gone fast, but my friend inspired me and now I grind the meat and mix it, let it sit and dry it in the oven.
I should have a smoker, but that's future.
Now to shape the jerky, this year I experimented with good old rolling pin. You roll the mix flat on aluminum foil covered cookie sheet, cut strips in it with pizza cutter and dry it in the oven say 200 - 220F for two hours. It helps to flip the piece every so often to speedup the drying; the pizza cutter will not actually separate the meat, just create breaking lines for dried jerky.
Yesterday I tried to form jerky with sausage stuffer on my KitchenAid mixer. It disposes link of meat again on a cookie sheet covered with aluminum and the oven drying is the same. That works fairly well, it is a bit of PITA to get the meat link line up on the sheet, but it works well enough.
I don't have a jerky gun, but that's probably the best way to lay down this mix. Jerky gun and some drying racks for the oven and I will be all set.
Now when I was doing muscle jerky, I hung it from skewers from the oven rack, the great advantage was it was drying larger quantities at once.
It is quite simple actually. I use Hi Mountain mix, we like the mesquite the best but I experiment with other flavors too.
As far as drying and the production, I am still searching. I used to do muscle jerky, lot of work and gone fast, but my friend inspired me and now I grind the meat and mix it, let it sit and dry it in the oven.
I should have a smoker, but that's future.
Now to shape the jerky, this year I experimented with good old rolling pin. You roll the mix flat on aluminum foil covered cookie sheet, cut strips in it with pizza cutter and dry it in the oven say 200 - 220F for two hours. It helps to flip the piece every so often to speedup the drying; the pizza cutter will not actually separate the meat, just create breaking lines for dried jerky.
Yesterday I tried to form jerky with sausage stuffer on my KitchenAid mixer. It disposes link of meat again on a cookie sheet covered with aluminum and the oven drying is the same. That works fairly well, it is a bit of PITA to get the meat link line up on the sheet, but it works well enough.
I don't have a jerky gun, but that's probably the best way to lay down this mix. Jerky gun and some drying racks for the oven and I will be all set.
Now when I was doing muscle jerky, I hung it from skewers from the oven rack, the great advantage was it was drying larger quantities at once.
Egon
Epic Contributor
Thanks Prokop!:thumbsup::thumbsup:
txdon
Super Star Member
Today's project: Framing and digging for a cement curbing for the sides of a paver walkway.
blackie65
Silver Member
finish up a ballast box and change the pins on a rear blade from CAT II to CAT I.
hose left in barn is frozen..... put in garage to thaw
may mix sakrete with bucket or just wait
Ran out of Oxygen so torch work is done.
supplier is closed.... hacksaw...NOT maybe long extension cord and sawzall
Seems like all I planned is not going according to plan
Also, the plastic extension on the new safety diesel can fell in the tank when filling tractor.
Guess I will go to the woods and get some wood
hose left in barn is frozen..... put in garage to thaw
may mix sakrete with bucket or just wait
Ran out of Oxygen so torch work is done.
supplier is closed.... hacksaw...NOT maybe long extension cord and sawzall
Seems like all I planned is not going according to plan
Also, the plastic extension on the new safety diesel can fell in the tank when filling tractor.
Guess I will go to the woods and get some wood
czechsonofagun
Elite Member
Rebuilding KitchenAid mixer, after 10 years of hard service it stopped. Of course it stopped on Tuesday before Thanksgiving:thumbsup:
I replaced the board - it was always confused on speed, it was time to do it
also replaced cracked transmission housing with aluminum one this time
yesterday I found why it stopped - the thermal fuse on the field burned, got a new one from Radio shack.
All it needs now is the front bearing - ebay - and it will run again.
I replaced the board - it was always confused on speed, it was time to do it
also replaced cracked transmission housing with aluminum one this time
yesterday I found why it stopped - the thermal fuse on the field burned, got a new one from Radio shack.
All it needs now is the front bearing - ebay - and it will run again.
OP
CompactTractorFan
Super Member
Hanging Christmas lights today...:confused2::confused2::confused2:
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 21,059
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
finish up a ballast box and change the pins on a rear blade from CAT II to CAT I.
hose left in barn is frozen..... put in garage to thaw
may mix sakrete with bucket or just wait
Ran out of Oxygen so torch work is done.
supplier is closed.... hacksaw...NOT maybe long extension cord and sawzall
Seems like all I planned is not going according to plan
Also, the plastic extension on the new safety diesel can fell in the tank when filling tractor.
Guess I will go to the woods and get some wood
Stream of conciousness post?
grnspot110
Elite Member
- Joined
- May 16, 2007
- Messages
- 2,735
- Location
- MO
- Tractor
- John Deere 1944- H, 1961 Cub Lo-Boy, 2016- JD 2025R, 2018- JD X580
LBrown59
Super Star Member
- Joined
- Oct 27, 2004
- Messages
- 16,904
- Tractor
- 2003 Kubota BX1500/2004 Kubota Bx23/2005 Kubota BX1500
1* and 2*There is already a thread that covers all these examples.
WHAT DID YOU DO TODAY ? - TractorByNet.com
It would be nice to keep every thing in just one thread .
Makes it easier for all to find and easier to keep all the info toghter.
OP
CompactTractorFan
Super Member
Sorry, I was not aware that there was another thread.
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 21,059
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
Tilled up a flowerbed with my Mantis-style tiller, added six bags of cotton burr compost, retilled, and planted 200 tulip bulbs. Actually, I only planted 100 tulip bulbs since my wife planted the other 100. She raked the bed smooth after I tilled it too. :thumbsup:
txdon
Super Star Member
... and planted 200 tulip bulbs... :thumbsup:
I bet a ukulele is on your wish list.
YouTube - Tiny Tim
