How much incline is too much?

[jeffster]

Think you will find you can handle more slope going down hill than up hill. Not many roll over forward but with FEL may be about same going uphill. I really believe a tractor handles more of a slope than the operator does. Watch the angle we use a tractor and blade on a hill of dirt.

Which tractor though? That makes all the difference in the world. We also have a 70s Deere 820 that I have absolutely no problem taking places where the 3520 would definitely tip, no questions asked. I have had the 3520 on 2 wheels a couple of times and trust me it isn't any fun at all. Prior land owner was severely injured due to his tractor rolling on a hill about 30 degrees or so, and we have a friend that **** near killed himself when his mower caught something while on a hill and it jerked the tractor enough that he rolled it, and it wasn't that steep of hill he was on. So, am I probably overly cautious now? Yep, guilty as charged. But, I would rather live than take the risk. I know the limitations of the 3000 series and I won't push them just to try and make things quicker or easier. But, really, it again just depends on the tractor in question and your ability to react to any given situation. Be safe everyone.

 

[jenkinsph]

Which tractor though? That makes all the difference in the world. We also have a 70s Deere 820 that I have absolutely no problem taking places where the 3520 would definitely tip, no questions asked. I have had the 3520 on 2 wheels a couple of times and trust me it isn't any fun at all. Prior land owner was severely injured due to his tractor rolling on a hill about 30 degrees or so, and we have a friend that **** near killed himself when his mower caught something while on a hill and it jerked the tractor enough that he rolled it, and it wasn't that steep of hill he was on. So, am I probably overly cautious now? Yep, guilty as charged. But, I would rather live than take the risk. I know the limitations of the 3000 series and I won't push them just to try and make things quicker or easier. But, really, it again just depends on the tractor in question and your ability to react to any given situation. Be safe everyone.

I agree, my prior tractor was the 820 and was a straddle platform tractor and had a lower center of gravity than my 4520 with flat platform and cab. Much safer to go up and down the hills, I don't wan't to hear about someone getting hurt just to save a little time.


Steve

 

[whistlepig]

There is no magic degree of slope. Perhaps there is a washed out dip that wasn't there before. Perhaps a new groundhog hole. After one mows enough steep places they learn to "feel" with the tires on the tractor. To feel comfortable with a certain degree of slope or some sort of "Slope Meter" in my mind is just plain fatal. This isn't plug and play. Only with years of mowing the side of cliffs can one learn this. If it scares you, you are a wise man.

 

[slate mike]

Thanks to all for all the great info. I think I'll get an "incline-ometer" and keep off any side hills more than 15 deg. The Cub Cadet lawn tractor can handle the steeper stuff. I do wear the seatbelt and keep the ROP up. And have absolutely no interest in testing their effectiveness in a tip over.

 

[Nuru]

Yep, there is this one spot on the flat are of my property that I continually forget to fill and it suddenly makes the tractor pitch slightly but suddenly. I gotta fil that shallow hole.

 

[slate mike]

Where to get an "inclinometer?" Would TSC have them? And where do you mount them? Obviously someplace where it can be easily seen.

 

[slate mike]

Good point, Whistlepig, but at least the inclinometer would tell me where I was (degree wise) when I start to get nervous.

 

[megotatractor]

"OOPS!" is too much.

 

[SpringHollow]

Go here to my slope meter page and it shows the ones i bought from an advertiser here. They are very nice. There is a link there to a post here if i remember correctly.

USA Discount Generators - Standby and Portable Gillette Generators

Oh, and if you have my tractor/slope mower, the answer is 45 degrees

Ken