Ford 641 4.70 star(s) (7)

Information, reviews, photos, discussion topics, owner pages, and specifications about the Ford 641.
Vintage Tractors
1704768916.jpg

About the Ford 641



Ford 641 Discussions (45)

Here are the most recent 641 topics from our community.
  1. D

    Ford 641, do I have the first one made ?

    Ford 641, 4 speed, with the serial number of 1 D, Therefore, it's a 1957, right ? And.... what is the FIRST Diesel Ford 641 doing in a small town in Iowa ? I bought it over yonder several...
  2. 4

    Comparison Does loader match

    Hi, I am looking at a ford 641 for sale which has attachments I would like but does not have loader. I know of a loader off of a ford 8n for sale and I am wondering if it will fit onto the ford...
  3. M

    Ford 641 Charging Issue

    I have a 1958 Ford 641 with a charging problem. It still has the original 6 volt positive ground system and is still using a generator. I had a charging problem a while back that required me to...
  4. M

    Starting problem Ford 641

    I have a 1958 Ford 641 Workmaster that's in really good shape. It has very low hours and was only ever used for mowing. Ever since I got it a few years ago, it's had starting issues. When I push...
  5. M

    Ford 641 12v conversion

    I have a 1958 Ford 641 with original 6v system. The charging system is giving me fits. Every time I start it, I have to jump the voltage regulator terminals to get it to charge. I'm considering...
  6. C

    Ford 641 rear tires need new ones

    Hello to all, My 1958 Ford 641 is needing some love after many years of good service. I am getting close to retirement, and sprucing her up is in my plans. It has 12.4 x 28 rear tires. They were...
  7. T

    Ford 641 battery/electrical question

    Question on the ramifications of connecting battery cables to the wrong battery terminals. Purchased a 1958 Ford 641 last fall. Previous owner had installed new battery (6V) prior to sale...
  8. S

    3-Point Hitch Ford 641 hydraulic pump bleed plug allen head size

    Need to bleed my hydraulic pump. Can someone tell me the allen head size I will need so I can purchase one? Thanks in advance for any help you can give me.
  9. I

    How taut valve cover gasket Ford 641?

    Hi all, I'm trying to reseat the valve cover gasket in my Ford 641. How tight should that thing be? Should it just lie in place or do you have to work hard to stretch it? It's about all I can do...
  10. gemutlich

    Ford 641 front hydraulics disconnect question

    Gents, Hoping to not spend another Winter where I'll be tempted to use this beautiful Dearborn model 19-3 snow plow again. Plan is to put the plow and all it's periphery up for sale, to be...
  11. gemutlich

    Connecticut Wanted, 6x16" steel wheels for Ford 641 tractor

    Gents, Wifey is asking for a front tire with more float. The 4.00 - 19's ain't cutting it. Or, maybe they are and that's the problem... Anyway, we're on the hunt for a pair of OEM 6x16's with...
  12. bobsphotos

    Ford 641 throttle linkage question.

    I have my 641 in my shop for a winter project and after pulling out the junk battery box I started to clean up the throttle linkage. I noticed a spring on the New Holland parts list that is...
  13. L

    Ford 641 Workmaster

    I have a Ford 641 Workmaster, the transmission locked between 1st and 2nd gear and I cant seem to get the forks to move. Any suggestions before I split the tractor? Thanks
  14. S

    Ford 641 Lift is slow up

    My tractors lift would leak down in about 5 min when shut off and when running would drop about 2" and bounce back up. the pump seems to be in good working order. I have recently rebuilt the...
  15. I

    Ford 641 replacing fuel valve

    Hi all, the fuel valve drips gas on my Ford 641, a drop or so every few seconds whether open or closed. I've read posts here and on other forums that suggest I need to either replace the valve...
  16. N

    Ford 641 Workmaster questions

    hello, Does anyone know how many Ford 641 Workmasters were produced? Also how many were produced in 1957? What did Ford do the the 641 to give it so much more horsepower than the 640? Didn't...
  17. N

    Ford 641? 640? 841? body style and model number on block don't match!

    Hello, I am confused about exactly what model tractor I have . . . the body style and medallion makes you think it is a Ford Powermaster, since the medallion says "800", the decals say "801...
  18. bobsphotos

    Oil & Fuel Odd Ford 641 hydraulic oil level issue.

    My new to me Ford 641 has a very odd hydraulic oil level issue. When I brought the tractor home I changed all the fluids and used UTF for the transmission, hydraulic reservoir, and rear end. After...
  19. M

    Spark timing on Ford 641

    I replaced the oil pump and had to remove the distributor in the process. I failed :mad: to mark the position of the distributor rotor relative to the opening and closing of the points so I tried...
  20. bobsphotos

    Ford 641 3 point hitch lift issue

    I just purchased a Ford 641 to use as a dedicated chipper tractor and I have an issue that I need to get fixed. The former owner said that if the 3 pt hitch would not lift, partially remove the...
[ad placeholder]

User Reviews (7)

Read what TractorByNet members think about the Ford 641 Subcompact Tractor
5
71 %
4
29 %
3
0 %
2
0 %
1
0 %
5.00 star(s)
gwinborne

641 Ford
Nice Ford 641
Model Year: 1959

Have put this tractor through and it has held its own. Plenty of power for its size.

Pros: Very easy to operate Dependable.
Cons: No hi/lo transmission gear.

5.00 star(s)
gwinborne

641 Ford
1959 Ford 641
Model Year: 1959

Tractor has plenty of power, 48.2 horse power. Has been very dependable, cranks as soon as you touch starter button. Converted to 12 volt. I have put this tractor through plenty of hard work. Probably more than it should take, but it has done every job very well.

Pros: Dependable, easy to operate, plenty of power for its size.
Cons: Really none if used for what it was intended.

Photo Uploads:

5.00 star(s)
kprat

641 Ford
641 Ford
Model Year: 1959

Tractor smokes in process of rebuild and trans has brg notice in process of repairing.

Pros: Good for around the house and small farm.
Cons: No 2-spd trans no locking diff.

4.00 star(s)
solarkowboy

641 Ford
A Little Knowledge Goes a Long Way
Model Year: 1962

Bought tractor from a young guy who had just traded it for something from a neighbor. The neighbor, a lawyer from city, didn't know much about tractors. He traded it off because had trouble starting it. Tried to make it an ether baby. After trying a lot I thought to check and see if young guy had really changed out fuel filter---nope. Put new filter on and it started right up for 6 or 7 starts. Then right back to hard start. Installed water separater in line and another new filter and all is good, just dump sed. bowl often.

Pros: Dependable for bush-hogging.
Cons: No aux. hydraulic for front bucket, etc.

5.00 star(s)
56flatbed

641 Ford
Family Ford 641 Workmaster
Model Year: 1958

This may seem more like a history than a review. I hope the info is useful to anyone considering the purchase of this or any series of Ford tractor. My father bought this tractor new in '58 for use in his landscaping business. It is equipped with the 134 ohv engine, 4spd trans with step down aux. trans. live PTO and superior front end loader. The tractor was used for many years for basic landscaping chores, moving fill materiel, topsoil, etc. grading and so on. In 1965 the family moved to Lake of the Ozarks, Missouri. This gave the 641 a whole new purpose in life. From easy loading and grading to relatively heavy use in light earth-moving, and construction projects. The grader blade and rake gave way to a Sherman backhoe and related work on trenches, septic work and anything else Dad could find to do. During all those years, there were almost no problems with the tractor itself. We replaced the starter twice and did normal tune ups and oil changes. Occasionally a hydraulic hose would blow, or we would have to have a cylinder on the FEL repaired, but everything on the tractor pretty much kept on going without much problem. About 20 years ago, we started having a problem with the primary trans. It will pop out of first gear and lock up, requiring removal of the top cover and pushing the trans fork back in gear. Avoiding use of 1st gear allowed continued use of the tractor. Several years ago Dad started showing signs of dementia, and no longer was able to do the things he used to. As my brother and I lived out of state, the tractor sat unused for long periods of time. When Dad passed away, it sat for several years. Recently I have been visiting the old homestead more frequently and hope to have the tractor running soon so that I can put it on a trailer and bring to my home. I have no doubt that it will be earning it's keep for many years to come. If you have any questions, please feel free to contact me. I will load some pictures when I go home later this year.

Pros: Just keeps on going.
Cons: Cannot think of any.

5.00 star(s)
641Dave

641 Ford
Mower and Box Blade Work
Model Year: 1958

For an antique tractor it does well. Parts are still relatively easy to find and easy to work on. I'm using it to tame some land, primarily using the mower and box blade to clean up 10 acres. One thing about the 641 though, it's to fast in first gear to use with a rototiller. If you plan to garden, you need the 5 speed or another model.

Pros: Easy to maintain.
Cons: To fast in 1st gear for a roto tiller.

Photo Uploads:

4.00 star(s)
Anonymous Poster

641 Ford
Old Ford
Model Year: 1957

I have 100 hours on the rebuilt. It has had minor issues mostly associated with age, some things weren't replaced. It is almost the perfect tractor for me. The only thing that would make it better is live PTO (wrong model for that). It is relatively easy to work on and get parts. There is a wealth of information out there about this tractor. If I had to do it over again I would get one of these fords, but next time one with live PTO.

Pros: Easy to operate, durable and reliable, Lots of info and parts avalable.
Cons: Old, even though it is easy to work on, I will work on it.

[ad placeholder]

Ford 641 Owner Pages

View owner pages to see photos, customization and comments about member-owner Ford 641s
No results found.

Ford 641 Community Rankings

#36 user rating of 679 Vintage Tractors items
#27 Viewed of 679 Vintage Tractors items
#16 discussed of 679 Vintage Tractors items
#787 user rating of 19625 items overall
#455 Viewed of 19625 items overall
#318 discussed of 19625 items overall
#11 Ranking of Most-OwnerPages in 19625 items overall
Top