Have a Branson 4020R that the foot peal and levee for throttle dropped working. If you use the throttle control on the console the throttle lever on the pump seems to stick but still does not...

Does this 2 coil solenoid have a relay between ignition switch & solenoid? Does the 70 amp relay on left side of firewall under dash control any part of the fuel solenoid function? What is the...

Need help. Early model 4020 Branson, Out moving heavy grass few weeks back and lost all hydraulics. No FEL or TPH operation. Replaced hydraulic pump, TPH piston and rings, and new FEL control...

Have to replace some oil in my Branson 4020. Hard to tell on the sight glass but had a leak on my backhoe Most of the oils I see online don't really give the specs. Saw some posts on here but cant...

i will post pics of both tractors later,but if they were equal condition and equal cost which would you buy? i want the biggest tractor i can get for the money will be pulling box blade and useing...

i am going to drive this branson maybe tomorrow, i know tym bought them ,im a little concerned, tractor data says its turbo charged, motor made by kujute? has 971 hours, its a manuel,(i know...

My name is Gregory and I have been the owner of Branson 4020 for 2 days. I need all information about branson 4020, manuals

I need to replace my front tires on my Branson 4020. I was looking at these tires. The right size. New ZEEMAX Heavy Duty 1-16.5/1PR G2 Skid Steer Tire for Bobcat w/ Rim Guard It says G2 tread...

I own a 2004 2040 and now I see they manufacture the 2040R model. Can someone explain the difference(s) please? Thank you.

I have a Branson 4020 2003 or 2004 model. Doing a little digging today and heard a solid snap like something broke. I then had no power to rear wheels. Front wheels still drive in all gears...

Thinking about buying a 2002 Branson 4020. I would like to read the operators and/or service manual before traveling four hours to see it. All I can find is the 2016 4020r manual which has a...

Want to repair the accelerator housing, (some call it the governor). Need to know what problems to expect and how to properly dis-assemble. Engine would start once, go about 10 feet, and shut...

Hello everyone, I am new to the forums, not new to tractors or equipment. I am having a issue with my 4020, I have owned it about 2 months and put 15hrs on it. It has a manual transmission and...

I need some more help. I put the 4020 back together today and can't get engine to start. I have fuel from the electric pump getting to the injection pump, I pulled the line off and found a good...

I am helping a guy out with a 4020, when he was running it the coolant drain line got ripped off and he lost his coolant after he found it he fixed the line and filled with coolant, started and...

First time on this forum. Of course I have a newbe question. I live in the middle of nowhere and there's only a NAPA store for supplies. I need filters for my Branson 4020. Of course NAPA doesn't...

Hello all, I bought a Branson 4020 a couple years ago and have been using it mainly for bush-hogging. It is overdue for some maintenance and I found a few answers to questions here at this...

My father-inlaw has a Branson 4020 with an electrical problem. Basically if you turn on the lights, turn signals, hazard lights, shift into reverse (reverse light) or step on the brake. All the...

I cannot get the PTO to engage. the lever seems to be working but I have to hold the clutch in and have someone put a cresent wrench and engage it to either 1000 or 540 then it stays engaged all...

I cannot get the PTO to engage. the lever seems to be working but I have to hold the clutch in and have someone put a cresent wrench and engage it to 540 then it stays engaged all the time. Does...

I have a Branson 4020. If I park on a slight slope to the right fuel will leak out the cap considerably. The tank is about 3/4 full. The cap was replaced but still leaks. Has anyone else had this...

OK this weekend I finished changing out my fluids. Replaced hydraulic fluid with Cenex Maxtron THF (synthetic blend) which has outstanding cold weather specs., but is an all season fluid. I used...

Looks like another possible hydraulic problem developed. Started tractor today, outside temp around 0 degrees, recycled glow plug about 7 times but started ok. I let it run about 15-20 minutes...

Does anyone else have this problem or is it normal? I recently had 2 hydraulic hoses blow. One at the control valve and on a different day one near the bucket.(got a oil bath from the one at the...

This probably is a dumb question but I didn't think much of it until now. I got a jump start on my 50 hr maintenance and changed the engine oil and filter. My dipstick has 6 marks on it and...

Any body have any experience with the branson 4020 tractor. Or any of their models for that matter. Finaly found the branson site. Had to call the site in georga to get some numbers for local...

Branson 4020 Basic Maint Q\'s Hello Everyone. I purchased my 4020 about 1 year ago after reading many, many post on this site - thank you all. I found a good local dealer who made me a great...

Well, we had a great weekend here. The winds and warm weather are finally drying things out enough that I could do some backhoe / fel work. First I had to change some equipment around...like...