I'm looking at a Kubota B8200 HST 4x4 for $12,500 and I'm wondering if it's an ok deal. 452(6) on the hour meter and comes with front bucket, backhoe, and turf tires. The seller thinks it's manual...

I agreed to fix the leaks on a friend's old 80s era Kubota B8200. This tractor is common around here, and the way the cylinder goes together is just about my least favorite. The end cap (gland)...

I have an older B8200 that I use to mow on my farm. My husband bought this many years ago and it did not have ROPS. My husband passed away 7 years ago and my family is asking me to get ROPS if I...

My dad has an old B8200 and the fuel tank is rusting out on the inside. Thought it would be a pretty easy find, but unless I want to pay out the wazoo for a genuine Kubota replacement I'm not...

My tractor battery died. Went to Autozone to get a comparable battery. They couldn't match it perfectly so I got the closest thing. I can eliminate a whole lot of problems because I can jump...

I have a B8200HST with a PTO backhoe and front end loader attachment, that I got from a neighbor. I got the tractor running and the PTO works. The issue is the front bucket hydraulics don't work...

Just brought home a B8200HST that had been sitting outside for a few years. Estate Purchase so I cant ask the past owner about condition. Got it running but it will not move and no hydraulics for...

I'm looking for a set of R4's for my B8200. The question is can I keep the same rim, or do I have to get a narrower rim? My turf tire rims are really wide. I couldn't get R1's on those rims, but...

Hi, I very recently bought a Kubota B8200HST. Engine runs away happily all day but the drive power, which seems to me slow to start, gets worse to the point that unless it's on the flat it hardly...

Finally have I got everything in order. It's been a long work in progress for sure. Last year my craftsman LT2000 gave out. i mow about 2 acres and it is a chore sometimes with that thing. So I...

I finished my cab & snowblower on my b8200, pulled it out of the garage the night before our one and only snow storm, turned the wheels and snapped the steering column. It was tough to steer...

As part of my cab project I decided to give remote start a go. I'm using 2 wireless relay boxes from china, about $8 each, plus a 30a relay for the glow plugs. One relay bypasses the key switch to...

I'm going to look at one for a friend. Did the B8200 HST ever come with power steering? And if so, is it an external power cylinder or something internal to the steering box? thanks, rScotty

I'm looking at an older model of the B8200 HST 4WD for a friend. It looks good, cranks nicely, but doesn't run.No obvious leaks and from appearances was good machine before it sat for a decade or...

Hi all, I've finally got close to buying my first tractor... however... It's a 1980ish B8200 HST 4X4 with a front loader but here's the kicker, it has issues. The deal is right at $2700.00 but...

Hi Can anyone help with how I do the timing. Also how do you number the cylinders, is the first cylinder behind the fan number 1 or is it reversed and is number 3. ANY ANY HELP WOULD BE GREAT

Does anyone know what these threads are? I thought for sure that the 16mm x 1.5 ATM 2275 mechanical temperature gauge adapter would work. But, the threads are finer than 1.5, and not fine enough...

Hey all hope your february is going ok, got a couple of questions, today I was working on my tractor, replacing filters etc. I was trying to get my lights to work again but hadnt had any luck, I...

I'm thinking of mounting my Kubota 4672A backhoe on a yet-to-be procured Kubota B8200 2wd tractor which has a hydraulic front blade rather than an FEL. The blade has good down pressure. I could...

Hi out there, hope someone can help..... Have a old Kubota B8200, with a Hydro-stat-trans, it's been laid up a while....drove OK and then suddenly stopped driving, in either forward or...

Left front tire locks up and rockes back and forth

my first post on this terrific site and wanted to say thanks to the author of the rebuild on the Kubota alternator,terrific information and valuable as well. I wonder if anyone has been able to...

ok.... I have a 8200 HST- and was having problems with it missing on cylinder 1 (closest to the radiator) so I did a compression test and got the following results cyl 1 = 350 dry 365 wet cyl 2...

I need to know the measured width of a B8200 with turf tyres. I may be going to pick one up ut by plant trailer only has a 4 ft wide bed! All the websites say it is 140cm wide (55 inchs) but is...

I haven't found any supplier that can give me this answer. I got a new set of balls and tubes from Weaver that do fit my ball nut, but I'm not sure if the set has the right number of balls. It...

It appears that the engine side panels for my B8200 are discontinued from Kubota If anyone knkows where i might pick these up it would be much appriciated Thanks!!

Howdy, I'm a brand new member, and this is my 1st post. Just bought this old B8200 3 weeks ago, and it had a 3/4 steering wheel free spin. Today while shredding, the steering quit turning left...

The boot on the shifter is cracked & I need to replace it, but I can't get the knob off the top of the shifter. I can spin it, but it's not unscrewing (I'm not even sure if it's threaded). I've...

Hi! This Kubota has so many features that with out help we don't know all of them. Does anyone knows where I can get user manual for Kubota B8200 DT HST? PDF is ok. Br Hessu

I have a REAL problem. I have acquired an old B8200HST. The loader was wobbly. Observed several missing bolts that attach the frame to the engine. The bolts that attach the loader to the frame are...

Just bought this tractor a few weeks ago and ran fine aside from the usual black smoke on startup and under load. After getting it home I ran it just a little and everything was ok. Changed oil...

Has anyone else had trouble with replacing their fuel filter for their Kubota? I tried replacing my fuel filter on my b8200 I just got, and the opening on the filter was just a little too small...

My front pinion gear is shot on my b8200. I got a used ring and pinion from one of the scrap yards. The pinion gear had seven teeth,compared to my original which has six, Does anyone know why they...

I've got a Kubota B8200 that currently runs great... I found a D850 motor which is either brand new or newly rebuilt on CL at a great price, so I picked it up. If the 950 in my tractor ever goes...

I've got a Kubota B8200 that currently runs great... I found a D850 motor which is either brand new or newly rebuilt on CL at a great price, so I picked it up. If the 950 in my tractor ever goes...

If not, would you recommend using one? Where can I go to get a high quality one?

I am looking at a Kubota B8200. I can have it for free if I can get it, the trick is I will need to pull or drive it across a river. It was on some land someone purchased in my family. It is...

Well, had my first "disaster" with the B8200. Running a belly mower and the lifting "chains" both came loose and also the pin for the alignment came loose at the same time. The mower shifted and...

Have a Kubota B8200 and having problem with hydraulics. have had hydraulic pump removed and checked out fine. Hydraulics worked fine while priming,next day, they were out again. Any suggestions?

Hello everyone, I just purchase a Kubota B8200 HST. The tractor wasn't running but seems to be intact. Glow plugs are working, injectors are getting fuel, and the compression seems to be there...

Hi iIm just signed up. Iｴm from Sweden and just bothed a Kubota B8300 Hst. Thr tractor is very slow and week. Canｴt go up for a small hill. Roland:mad:

Can anyone tell me where and what controls the rate of fall for the 3 point lift arms on a Kubota B8200, lift works great but lift rate of fall is very slow, new to me B8200.

I just bought a Kubota B8200HST, my first tractor. I will have many questions.:confused2:

I know it might not be a vintage tractor, but my friend has a Kubota B8200, built in 1984 (I think). It has been used hard and it blew a head gasket last week. We replaced it and then decided to...

Hi Guys. I am adding a Brand Hydraulics loader valve to my tractor to control a plow setup I am working on. While I am at it, I am going to add a 3 spool valve for additional remotes. My question...

Hi guys, I have 1,000,000 questions, but I should probably just order a factory service manual for most of them. However, I am curious about the hitch. When I lower the backhoe down, then put my...

Hello, Thought I'd take the time to introduce myself. I'm Luke, and I'm a cetane junky! This is my first tractor, but my 7th diesel "vehicle". I've owned and tinkered on my old 93 Ford 7.3L...

hi have a b8200 kubota and need to replace the left rear axle seal that is leaking and my question is does any one know if the bearing and seal is pressed on or if it is held on by a snap ring...

Just bought a used Kubota B8200 HST and like most used stuff I have bought I no manual for this. This is my first compact tractor, got other riders for the yard but this is the first kubota and...

Going to look at a B8200 with 650 hours. Comes with 5' belly mower. No other details. Priced at $6500.... seems a little high? Thanks jj

I have a B8200HST 720 hrs doesnt have as much power as it use to .trouble going up any grade in high range .Starts fine doesnt smoke has PTO pump and seperate fluid system for backhoe and...

I live in Maine own a B8200 HST Kobota with a 6500 woods Backhoe .Also have a set of clamp on forks which I would highly recomend Presently building a house Tractor really comes in handy and with...

I'm considering purchasing a Kubota B8200HST E, 720 hours, 2WD, $3000 and was wondering if anyone could please help me out with the following questions: 1. Could you dig post holes with it, even...

I'm considering purchasing a Kubota B8200HST E, 720 hours, 2WD, $3000 and was wondering if anyone could please help me out with the following questions: 1. Could you dig post holes with it, even...

My Kubota is a 3 cylinder diesel with hydrostatic transmission. When the throttle is any position including full on, the engine runs smoothly. The tractor operates well in low gear or at low...

Kubota B8200 diesel tractor Here is a link to a tractor I'm looking to buy. I talked him down to $3,300. It has 531hrs on it and is a 1985 model. I don't know a lot about tractors but the Kubota...

I recently bought a B8200 HST, a bit on the rough side. Transmission does not seem to take much load before it ceases motion. I drained the transmission oil and found some iron filings on the...

I am a new owner of a used B8200. I have been reading online about tires and front to rear gear ratios. I read on page 14 in the goodyear handbook...

I recently purchased a Kubota B8200HST and am having front loader problems. According to prev owner, the loader had plenty of power. My first experience is that it has almost no power. The...

Hoping that someone has replaced their seat on the b8200 without having to buy one of the HIGH $ factory seats? Anyone offer a suggestion here? thanks, Harry

I am in need of a pair of front 6-12 farm rims for my B8200 4WD. Also, looking for 8.3x24 farm rims for the same tractor.

A friend loaned me his Kubota B8200 HST to accomplish a sundry of tasks on my property. I don't think I've ever had this much fun with my clothes on; I already told him he'll have to fight me for...

Are these older B8200 a good small machine. I am intrested in known reliability & toughness for a small tractor. This would be a 2nd tractor for me as I have a JD 3032E. I don't like not having...

B8200 4wd tractor - where is the hyrdolic fluid fill port

I am hoping someone can tell me the length of the trans dipstick on a B8200 non Hydro trans. I just drained my UTF and the dip stick under the seat is apparently broken. Its got no fluid level...

Im hearing a buzzing sound from the hydraulic system and the 3pt is shuttering. Hopefully its not the pump going. There is a dip stick next to the shifter. Its the trans/hydr resivour. The dip...

I have recently purchased a Kubota b8200e (two wheel drive). I have started changing fluids, and I don't see an easily recognizable drain for the tran/dif/lift unit. I know it takes udt...

Greetings. I have plans to use a 3pt splitter on my Kubota B8200. I was wondering if anyone can tell me what I'm going to need to install a remote hydraulic hookup, and where I can get the...

Hi guys I am am in the middle of selling an 1987 B8200 HST. The tractor was my fathers and I am unsure of what a fair price would be. The tractor is 4WD has 620 hours and turf tires no FEL or...

I bought this tractor a year and a half ago. Changed oil last year, and put in the oil as per the Operator's book, and also the dealer. Last week, I found the oil level about an inch over the...

A friend on mine came by today and was in a jam. He's selling his property and wanted to sell his Kubota B8200 quick. He said he'd take $1000 and I said okay. Oh well, I have a new tractor. Maybe...

Looking for a repair manual for a Kubota B8200 or a good troubleshooting guide for its hydraulics. Modern Equipment has the manual for >$90. I'd like something a little less pricey if possible...

What's the best way to troubleshoot this problem? Both the 3 point and FEL on my B8200 have started to operate very jerkily, slowly and with little power. I checked the dipstick and the fluid...

My B8200 recently devloped a problem. When the 4WD is engaged and I put a load on the front wheels, like trying to climb a muddy slope, the front wheels don't pull their fair share. The rears...

can anyone help just bought used B8200 HST, when I drive around everything seems fine, but any little incline I need to put it in low range, I tried getting a bucket load of dirt with the loader...

can anyone tell me what a fair price is for a 1989 Kubota B8200 with 200 hrs.(mete broke???), 4 foot loader, 5 foot back blade, and 4 foot brush hog... every thing seems to be in great condition..

Hi all I've een lurkin' and learnin' for a few weeks now....I'm in the market for a compact, maybe orange or green, with a primary need to do clean mowing on several acres. Hope to add...

If anyone is looking for a good tractor, look on ebay for my B8200. Just do a search for Kubota and look for B8200HST. Lots of photos to see of it. Its item # 582681600 Thanks, Von

I just made a deal to buy a B2710 so I now have to sell my trusted B8200HST with turfs, FEL and a 6ft. finish mower. I'm in N.Y. if you have any interest feel free to email me for info.