The hour meter clicks on the one second slot, but non of the other numbers change. It would appear I have power and that the meter is bad, any thoughts. A new one is 100.00 thinking of buying an...

Hi all, I have a Kubota B7100HST-D 4WD with a mid-deck rotary mower RC70-71H. Three blades with the two-outer driven by a single belt and the central one off the gear box. For the past 10...

In a couple days I値l be picking up a new to me B7100HST with a FEL and 1800 hours on it. They are asking $6000.00 or $6500.00 with a rear Woods 48 finish mower. Is the rear finish mower worth...

Can anyone recommend a bracket that I might be able to retrofit onto a B7100HST that would accept the M8071 weights? I have 1000# of these M8071 weights and so I'd rather use two or three of these...

Ive got a new to me kubota b7100hst-d serial number shows 90-91 but the seller says it was a 95 model year. Anyway Im pretty sure the hydraulic pump is 1700psi at 3gpm. I really want to run a...

I have a Kubota B7100hst 4wd this tractor runs but the water pump is no good for 5 yrs this unit was held up in a court battle that was recently resolved. the tractor itself was not the issue it...

I recently purchased a B7100 with a woods DUal 145 loader installed. I have lately been using a pto powered wood chipper for about 2 hours at a time. When I finish using it, the hydraulics seem...

I am wondering if anyone has mounted an rc54-24b mid mount mower on a 90's B7100HST 4x4? Will this mower work on this tractor or does it need modification?

I hate to be the guy that makes an account on a forum just to ask, but I'm agonizing over this decision and I'm looking for input. My Cub Cadet LTX1045 has become more trouble than it's worth...

I hate to be the guy that makes an account on a forum just to ask, but I'm agonizing over this decision and I'm looking for input. My Cub Cadet LTX1045 has become more trouble than it's worth...

I need to replace some hoses on the 1630 loader on my '92 B7100HST. The ones from the loader valve to the hard lines. Does anyone know the size and thread? Last time I replaced hoses I took the...

Have a recent purchase of B7100HST-D and in checking the fluid level's .The hydraulic dip stick shows no level of fluid. have looked all over and find no plug that can add fluid. on top of...

Hey folks I just picked up a '93 Kubota B7100HST (4X4, 16 hp) and will be needing a rear mount snowblower for it. According to the owners manual the recommended max weight of the blower is...

Help so my b7100 has a few issues. First as soon as its put in gear it trys to go forward just a little before any forward or reverse is applied. Second low gear used to work the first day i had...

Hi all I just bought a very old Kubota B7100 HST it was used as a golf ball collector at a driving range so I don't think it was used and abused but probably neglected. The motor is super clean...

Hi I am looking for a Kubota B7100HST PTO shift lever. If you have one or know where I could acquire I would be most grateful. Thanks Dylan

I have a 94 B7100 with FEL that I've had for a few years. I've never put much on the back other than a hitch basket and the 3 pt lift has always worked intermittently. When I bought a brush hog...

Hello to all. I am new to all of this, with a 1980 Kubota B7100HST on five acres. I hope to learn a lot.

Thought the job would be easy - NOT! Took the Right Rear Wheel, Hub, Fender, Brake, and Axle Case off Relieved the fork and clutch dog gear to be in great shape - The diff case tabs are the...

I am looking at a 1983 B7100HST-1300 hours with a belly mower. The owner said he has problems when trying to engage the mower. it makes a grinding gear noise. I talked to a Kubota service mechanic...

Hi All, This is my first post and I've searched the forums and was unable to find an answer. I have several downloaded manuals for this 1994 tractor and all seem to indicate that the front wheel...

steering design not heavy enough will any other steering box bolt up

Hi, all! Just bought my first tractor for my hobby farm in Oregon, and haven't even taken delivery yet. My on-scene expert tells me that the Kubota B7100HST creeps forward very, very slowly when...

Any useful info anyone has out there for me ?

Hello , friends of mine is going to change the engine in my b 7100 kubota and I would like to know if they need to line the transmission up when they put it together ?or any other info/tips would...

Hi everyone well been awhile since I have posted anything in here so here goes.Last fall I purchased a 94 Kubota B7100 hst it has a bucket loader and its handy for doing some jobs around the...

I am in the process of installing a temp gage on my newly aquired B7100HST. I bought it around Thanksgiving and machine runs. It had showed signs of being overheated in the past with the...

Can anyone tell me what the auxilary hydraulic capacity is when connecting to the manifold block? What is the gpm on the pump and the pressure relief valve set at? I am wondering if it would...

How do you check to see that a stator/dynamo is working properly? The machine I just picked up had the wires unplugged from the harness and I think that it may have been unplugged for a reason...

Hello, New to being a Kubota owner. I picked up a used/tradein Kubota B7100HST. The serial number puts it at a '93 model year. The meter puts it at 1054 hrs. I am planning on cleaning up...

I have an old (1979) B7100HST that has run beautifully for 30 some years, but over the past two years, the transmission has been increasingly hesitant, at first being slow to respond when I...

I have a B7100 HST with FEL and backhoe. I have been having intermittent trouble with one valve continually popping off the valve cap. After removing the valve train and reinstalling and...

Bought the B7100HST about 2 years ago. Use it to mow a bit over 1 acre yard with a 60" deck, and have a 50-52" tiller that gets quite a bit of use. Been half heartedly looking for a replacement...

Well the last 3 mornings have been frosty,so I have the B7100 hst,the 4' snowblower.One thing I would like is a block heater or some kind of engine heater.My garage is unheated and it gets darn...

Hi, all My "fix" broke after only 6 months Sure could use some expert advice I replaced the rubber cover, brass ring assembly and cleaned up everything last time and thought that would be the...

I have a B7100 that leaks antifreeze under pressure only ( during mowing) . It looked like it was coming from the bottom of the radiator. I have taken the radiator off and drained the system. I am...

I have a B7100HST and the input shaft that goes into the HST unit has the splines sheared off. There is a coupling that goes on this shaft and a pin that holds the coupling from sliding...

Thinking of buying a Kubota B7100HST-D. The owner thinks it is a mid-90's model. How do I figure out what year it is with no paperwork or titles to go by? Thanks, B.

U-joints next to block was toast, it fell out! But putting them back is a good puzzle. I'm really not in a mood to install U-Joints up inside the belly of the tractor. I'd rather do it the easy...

I am looking for a B2030 blade for my B7100 HST. I have the subframe, mounts, and hydraulics. I bought this unseen as a set, but when I got it, the blade is some made-to- fit piece that belongs...

Recently I've purchased a well used Kubota b7100hst made in 1983, and among other things that could use a little work, I have some questions about the hydrostatic transmission. Please forgive my...

Does anyone know off hand what the thread size is for the auxiliary hydraulic supply is under the seat on an older style B7100 HST-D? I am at work and cant check for myself. Thanks.

Anyone have an idea where I can purchase an inline engine heater for my B7100hst? I was hoping to mount one in the lower radiator hose. I found a link from searching the archives, but it seems...

The bad news is that I have an oil leak that I"m trying to pinpoint. I guess the real question is could it be anything other than the head gasket? Tractor runs fine and there is no water in the...

I have a B7100HST, the E series. The neutral holder spring on this model is held by a threaded, adjustable shaft at the top end. The old top end bracket still exists from the prior model. When...

Picked up a B7100 today. Tractor is in excellent condition. One of the nicest used tractors I've ever seen, if not THE nicest. I'm extremely happy with the purchase. I have a Kubota Shop Manual...

Hello - new to the site.... I have an issue where the tractor wants to keep moving only when there is a force working against it. For example when pushing mulch backwards with my blade. The...

I would like to find out which engines will interchange with my 7100. Will a 21 horse fit?

I'm contemplating upgrading from my B7100HST. My B7100HST is a late-model (I'm told by PO '98) with a Woods DuAl 145 quick-detach loader. I have brand-new turf tires and wheels on it, plus the...

Are these Kubota specific? My 3 Point Hitch relief valve kicks in at a little below 1500 PSI, but is rated for 1700 PSI. With its anemic 400 LB lift rating, the 3PH on this tractor needs every...

TBN was an invaluable resource in this project. The control valve is currently attached to my ROPS with plywood ( easy prototyping material for me ). I'm going to make sure that I like it where...

I'm adding remotes to my B7100HST. There is a large bolt next to the HST filter, is that the plug for the tank return hole? Type size/type fitting fits this, to connect a return hose? Tanks, Jay

I need a steering shaft assy or complete steering assy. Any ideas where I can find it?

Any comments on using the following on my B7100HST? Harbor Freight Tools - Quality Tools at the Lowest Prices It is rated for a max pressure of 2500PSI. The B7100HST relief valve is set for...

Hi, I am new to tractorbynet. I have a b7100hsd/hst that has been sitting in storage unused since 2004. It has 480HRS on it. The tractor came with a property we bought back in 2004 but we never...

looking for shop manual and owners operation manual for my 1993 B7100HST, has any one scanned it into a file for their computer, thanks in advance

Hello, we have a 1994 Kubota B7100HST-D with loader. Yesterday, it decided to stop moving while driving across our property with no load. The engine starts and runs fine, but pressing on the HST...

I recently bought what was represented to me as a B2150HST. However, on the transmission is a tag designating it as a B7100HST-D, 4 cycle, 3 cylinder. The engine is a 4 cylinder. Any comments...

Does anyone make a Top-N-Tilt kit for the B7100HST, or do I need to go custom? Anyone got one for sale?

I have a '98 B7100HST with a Woods DuAl 145 FEL. It acts as if the relief valve is releasing at too low a pressure. I can lift a full bucket of stone or dirt, but the breakaway force is...

While working on my rear lift arms, I noticed a couple of strange behaviors and need to know if these are part of normal operation or if my tractor is hosed. When the lift arms are disconnected...

I work at the local Kubota dealer, while I would love a new BX24 or a BX15, I dont have the spare 5K+ laying around to get one. However, we had a decent, but rattly looking B7100, 2wd HST with a...

I have a strange thing happening with my B7100HST. I have had it for a couple months, and I am relativily sure this was not how it worked when I first got it. When you push down the pedal to go...

I've had a later model B7100HST for about 6 months. Been very happy with its operation and ease of servicing. I have a question about starting. It sometimes (after warming the glow plug) does...

Just found this forum and thought I'd upload a picture of my "new" b7100hst. Keeping the old woman off of it is a problem. This is my first tractor and I'm loving using/maintaining it. Got it...

I am in need of a loader tractor to handle round and square bales up to 1200 LBS. There is a B7100HST tractor for sale locally with FEL. The current owner does not seem to know much about the...

Can't get the 3PH to function. Lever moves front to back but arms are stuck in the up position and won't go down. Anyone got any tips on getting it to work?

Hello all Can some one tell me if Kubota front blade B2765A will fit on my late model Kubota B7100HST. Or if I need some kind of adapter to make it works. I searched Kubota website but found no...

The engine oil seems to get higher on the dipstick the more I run the machine. Seems to me I read something about HST fluid leaking through a seal , adding fluid to the crank case. Has any one...

owning-ML-820498-ML- Posted in wrong forum. Kubota specific.

Hi everyone, I was hoping to get some input on this tractor that I'm looking at buying. If you take a look at the pic I've attached you will find a 4wd B7100 that is dropping a bit of oil on the...

Does anyone know the Front/Rear drive train ratio of a B7100HST-D. I do not have this information in any of my manuals (aftermarket). I just switched from turf tires to ag tires and I would like...

I own a 7100HST and am needing to change the fan belt. How hard is it to do any suggestions or instructions, also am looking to find out if to get tips on changing maintenance items such as this...

Hey folks: I'm considering a B7100HST....not sure what year. I was wondering if this guy is rugged enough to run a small backhoe without any significant issues. Any thoughts? I've seen one...

Hi. My friend loaned me his tractor on a semi-permanent basis. It is an old model, a B7100HST. The tractor has a rear-mower deck attachment RCR48. A few months ago, the U-Joint on the PTO axle...

I am a newbie, has anyone out ther ever put a block heater in a Kubota B7100 HST and what is the cost of the part. is it somthing that is pretty simple to install? I am experiencing starting...

On my Kubota the rear axle hubs always work loose. The hub movement then breaks the safety bolt. Fortunetly the hub always seems to work inwards towards the tractor rather than falling off...

Hi All, I have a B7100HST 2wd with turf tires (50% wear) fitted. I am getting a lot of wheelspin while trying to use a rear blade to grade sand. The blade itself weighs 240lb. I dont want to...

Does anyone know how to remove the dynamo from a B7100HST (Old Style). There are six bolts and I cannot figure out how to get to the middle one on the bottom. Any help would be appreciated.

My B7100HST has had an overheating problem from the time I bought it from new about a year ago. I can use it only about 20 minutes before I have to shut ot down. Has anyone else had this problem...

Has anyone put power steering on one of these. I'm thinking maybe a car unit could be adapted. My old Body starts to ache and pain after a day of using the bucket and by the third day I've got to...

Can\'t seem to sell my B7100HST... I recently bought a B7500HST (great machine..so far) so I am trying to sell my B7100HST,4X4, with 60" MMM. It is a 1997 with only 160 hrs and was garage...

Several weeks ago my B7100HST (approximately 100 hours) began losing power and after diagnosing the situation, I determined that it was the fuel filter. I changed it out and, following the...

I just bought a 1995 B7100HST with a Kubota loader. How much does the tractor weigh with the loader? I'm thinking I'll need a 6x16 trailer to haul it safely with mower and loader. Anyone have...