ZT Tire Pressure

[mikester]

What tire pressure do you use in your zero turn?

I filled my ZD326 tires to the manual spec 17 psi and it rides like a pogo stick.

 

[Ford850]

8 psi on my Grasshoppers. That's per the GH manual spec.

 

[Bigkrank]

ZD1211 manual says 11 lbs.

 

[RjCorazza]

17, 8, and 11....

My ocd will not allow an odd tire pressure, so I keep 10 psi in my zd326 and 331.

 

[4get gto]

8 psi on my Grasshoppers. That's per the GH manual spec.

I think the lowest you can get away with. The lower I go does effect my mower height though.

 

[dragoneggs]

I recently bumped up my rear tire pressure on my Z122 just above the Manual recommendation, 14psi vs 12psi after noticing both tires looking very low after the winter. First thing I noticed was I had much less traction on damp grass/ground.

Maybe that is also why I started another thread here on upgrading to a suspension seat. :laughing:

http://www.tractorbynet.com/forums/...uspension-seat-my-little-zero.html?highlight=

 

[DK35vince]

7-8 PSI in my zero turn

 

[mikester]

I've got the pressure down to 12psi and its a lot better now.

I just started a new thread on adding an air suspension seat to my ZD.

http://www.tractorbynet.com/forums/...ng/396655-air-suspension-seat-mod-kubota.html

Here's the link if anyone is interested.