Wiring diagrams for LS XG 3135H and others are in this thread.

[Grizzysdad]

I have rodent damage on the wires running to the DPF sensor, Of course the little pissants left me about an inch of stub where the wires go into the main part of the harness, just enough to splice to. I replaced the wires, and it runs but has codes flashing, which tells me that the wire repair didn't succeed. Before I try again, I'd like to check the wires for continuity, as last time at one point it involved standing on my head and I would like to avoid that if possible, so I'm looking for a wiring diagram.
I'd appreciate it if replies were kept to wiring diagrams and not rodent avoidance, as the last time I posted this most of the answers were about getting barn cats.

 

[Eagle1]

I can offer some manuals that I use for mine.... MT240 and Workmaster 35 manuals in one zip. Link will only active for a few days because I'm dropping that server when the bill come due again.


https://gerrysweb.com/Manuals/LS-XG3135H.zip

 

[Eagle1]

The workmaster is the LS XG/XR tractor minus a few standard features that are options on the Workmaster. NH uses a different loader (I think) and a different shade of blue. If you add MT to front of an LS part number you have the NH number.
The MT2 35 and MT2 40 is the next generation of the XG and XR 3135 and 3140

Workmaster is a re-branded LS with minor differences in options. These manuals so far have let me figure out things since I could not find an XG (or XR) service manual when needed. I bought mine used and had to learn.

Now be prepared the was an evolution in tractors nothing simple anymore. I have 2000 BX and nothing to it, like your 7800 just mechanics. These tractors are all ECU driven and just having the error codes in hand is a lifesaver. If I can help give me a shout.

 

[Eagle1]

I hope it works out, it way better than nothing. If you guys do run into a XG service manual, remember me.
I've never had too much tech info.

 

[Grizzysdad]

Thanks so much Eagle1. I'll definitely forward any manual I find to you.

 

[Asteral]

O boy! I'm Hopefully gonna make some of ya'lls day, here is what i was able to locate for service manuals for the xg models

XG3135-40 AND WORKMASTER 35 & 40.pdf - xg3135-40 & workmaster 35 and 40

XG3032 - XG3032H - XG3037 - XG3037H.pdf - xg3032/h - xg3037/h

XG3025 - XG3025H.pdf - xg3025/h

XG3000.pdf - xg3000

 

[Eagle1]

O boy! I'm Hopefully gonna make some of ya'lls day, here is what i was able to locate for service manuals for the xg models

XG3135-40 AND WORKMASTER 35 & 40.pdf - xg3135-40 & workmaster 35 and 40

XG3032 - XG3032H - XG3037 - XG3037H.pdf - xg3032/h - xg3037/h

XG3025 - XG3025H.pdf - xg3025/h

XG3000.pdf - xg3000

My Hero Thank you for sharing.

 

[Asteral]

My Hero Thank you for sharing.

not a problem, i'm a firm believer in giving people who would like it the ability to do their own work, the fact some of these companies hide these behind paywalls is awful, like you guys already paid 10-40 grand your your equipment ( depending on the model) why should you have to also pay more to be able to work on it.

 

[ptsg]

Asteral over here doing public service! Thank you Asteral for all the help over the years!

 

[Asteral]

Asteral over here doing public service! Thank you Asteral for all the help over the years!

my pleasure ptsg