wheel extenders for BX

[Rusty4242]

I'd like to lower the center of gravity on my BX23 to make it a little more stable
on inclines. Any leads on where I can find wheel extenders for the rear wheels and how do these work out? I already have wheel weights bolted on.How about bolting heavy plate on the frame bottom? How about welding 2 wheels together as extensions? thanks , Larry

 

[milkman]

Here's one solution, but the spacing won't allow the use of the MMM because the anti-scalp wheels on the rear of the mower hits the outter tires, works good on the hillside for everything else though, just run a few psi less air in the outter tires.

http://www.tractorbynet.com/forums/customization/74076-bx-whatyacallit.html

 

[lp333]

Here's one solution...

Great idea... great photo.

 

[SPYDERLK]

Here's one solution, but the spacing won't allow the use of the MMM because the anti-scalp wheels on the rear of the mower hits the outter tires, works good on the hillside for everything else though, [[[just run a few psi less air in the outter tires]]].

http://www.tractorbynet.com/forums/customization/74076-bx-whatyacallit.html

[[[Good tactic to give those poor axles a chance!]]]
larry