whitedogone
Gold Member
I have been looking at a used disc for the 4120. I found a 7 1/2' 24-20 with notched fronts and smooth back discs. Would that be a little large for my 4120? I can get into some hard clays around here.
What size disc for a 4120?
- Thread starter whitedogone
- Start date
- Views: 1388
Turbys_1700
Elite Member
If you have 4x4 you should be able to pull it...
In hard clay you are not gonna pull it fast...
I have a 5'-6" Howse med duty I pull with my NH 1720 which is a little smaller than your 4120 and it does fine...
I would think that a 6'-6" would be a better fit but if you have a good deal on the 7' disc I would go with it...
In hard clay you are not gonna pull it fast...
I have a 5'-6" Howse med duty I pull with my NH 1720 which is a little smaller than your 4120 and it does fine...
I would think that a 6'-6" would be a better fit but if you have a good deal on the 7' disc I would go with it...
dusty3030
Veteran Member
- Joined
- Jun 4, 2008
- Messages
- 2,275
- Location
- West TN
- Tractor
- Kubota MX5400 Cab, Kioti RX7320 PS/ Cab, Kubota M7040 HDC, John Deere 2355, Kubota U35-4, John Deere 317G
I pull one that big on my 4120 ehydro.
A range 4wd is about a given. No overly strain but you know it's back there.
My soil is fairly sandy so in all fairness I haven't hammered down in any clay.
A range 4wd is about a given. No overly strain but you know it's back there.
My soil is fairly sandy so in all fairness I haven't hammered down in any clay.
