Troy-Bilt Tuff Cut 22 inch high wheel mower parts

[Richard Battles]

I need to find a 22inch blade and blade spindle for the high wheel mower. if you know of anyone who may have parts for this mower please advise, or any subs on these parts.

Richard
WB4BYQ

 

[sudden]

TuffCut 22 mowers were manufactured by Gardenway Mfg. Co., headquartered in Troy, NY. They filed bankruptcy, and were bought by MTD. You might want to try contacting MTD and see if they sell parts you need. You might also contact the engine manufacturer for your mower. I have a TuffCut 22 and absolutely LOVE it. It can cut a bush down in the woods and not even choke down. Mine is a model 10750. It's easy to start, and a blast to run through the woods. I wouldn't sell mine for any amount.

 

[Richard Battles]

Thanks sudden, I called MTD, they do not have any parts for this mower according to the parts dept phone line.

Thanks again.

Richard

 

[Marcintosh]

Thanks sudden, I called MTD, they do not have any parts for this mower according to the parts dept phone line.

Thanks again.

Richard

If you still have an interest, I found it on the MTD site here -
SPINDLE KIT-TUFFCUT I&II - GW-80137

a wee bit pricey at $200 each. I have an interest as I own one with a bum spindle and lousy machine shop work (grrrr). My machine seems to have low hours for it's age and I'd like to use it.

Please, if you've found a lower priced one would you please let me know where you found it?

M.

 

[hobie]

I am interested in this thread too. I am trying to get my folks' old tuff cut back from a brother that doesn't use it. I'm maintaining their old place now, and that mower is sorely missed. I've spent weeks reclaiming what used to be lawn from bull brier, poison ivy, bittersweet etc...The mower has been sitting in a shed for years, so I know it will require some work to get it going. I also have to arrange to get it from one end of Massachusetts to the other. Keep us posted on resources. Thanks, Brian

 

[LostBallInHighWeeds]

1st post on this site.

The GardenWay TuffCutt is a great machine, I bought my M# 10750 from an estate in 2003. I used it for a year or so on 1/4 acre lot in the city, then "retired" it when I got a Simplicity lawn tractor. I have since moved to a country setting, a house on 2.2 acres, over half of which I am fighting to reclaim from various weeds, bushes, etc. Yesterday, out of necessity, I drug out the TuffCutt, which I haven't even started since about 2005. Same gas, same oil, nothing special. It fired up on about the 10th crank and I used it for about four hours, clearing maybe 1/10th of an acre. It hardly sputtered and made quick work of the weeds, vines and other "junk", during a thunderstorm no less!. Now reminded of its versatility, I will now...I SWEAR...start giving it the proper TLC to keep it running for years. Right now I need two tires and some belts, will change the oil and clean/replace the spark plug and sharpen the blade.

I will return to this forum for any updates on parts sources.

 

[LarryD]

Have you tried this site
I get here going through Milica Lawn Care
The first link didn't seem to work but there was a list of models after searcing Milica for Troy Built Tuff Cut parts.

 

[jwik56]

Goggle Your Description & part # and you will find many Vendors that have your Spindle. I found mine for $130.00