The Haymaker
Veteran Member
A few years back I managed to scrounge a set of forks in anticipation of owning a big enough tractor to use them. Now, the time has come!
Today's start was to attempt the Quick-tach sockets. So far, I have about 60 bucks invested in steel, including two 4' chunks of 3"x1/2" flat for the fork rails. I already have the 2" square stock to be used for the frame.
Here's todays progress.
Today's start was to attempt the Quick-tach sockets. So far, I have about 60 bucks invested in steel, including two 4' chunks of 3"x1/2" flat for the fork rails. I already have the 2" square stock to be used for the frame.
Here's todays progress.