TD60 Hazard lights work but not indicators

[choco]

Did a days rotary hoeing and when driving back from the property noticed that the indicators stopped working as well as the brake and headlights, checked all the fuses and all seem ok, the hazard lights still work.
Purchased a new flasher relay and installed it but still didn't work, not sure if it's an earth problem but whatever it is must have come loose when working that day.

 

[50degS]

Had a similar problem and mine was actually in the switch itself. There was a spring under a tiny ball bearing that served as the contact point for the hazard lights and the same setup in a different position for the rest of the lights. One of the springs had rusted in two and it no longer was making contact. Cleaned everything out and found an ink pen spring to cut and use for replacement. Took care of my problem.