Buying Advice TC 30 Front Angle Blade

[Papasmirf]

I own a 2007 TC30 4x4 9 spd. W/ FEL. I don't have frontend quick connect. Does anyone know of a angle blade that can attach to the bucket. I know I'm asking for a lot. I also haven't found. quick connect for the FEL. Please advise. Thanks and Merry Christmas from central Oklahoma.

 

[tcreeley]

This may have some useful stuff on it: ANBO Attachments - Bucket Add-on Snow Blades
http://www.anbomanufacturing.com/SnowBladesPlowsHDCSTM.htm
A welder could fabricate a mount for you- on the bucket or instead of the bucket . Someplace on this site there are examples of what people have made. Customization/fabrication forums.

Somebody suggested using the rear remotes for angling the plow - use one cylinder to swivel plow. The knob on the right side of the seat (on mine) controls the rear remotes. Use longer hydraulic hose from the rear to run up to the cylinder in front. If I angled a blade, I wouldn't want it mounted on the bucket- too much reach when pushing snow- makes the front end slide easily. I'd replace bucket with fabricated snow plow mount. Good luck. I think Kubota or bobcat makes these for their tractors.

I put a fixed blade on my bucket- snowbear 7' plow from Sam's club. Now I just use the bucket. Never got around to mounting the plow this winter. I just tip the bucket angle to stop the plow gouging and don't really use the shoes I have on the plow.

 

[Papasmirf]

That looks like a TC 30 4x4. I have a 2007 model that would be hard yo get rid of. A good, tough, dependable tractor. I'm looking to do the se with a front blade. Thanks for the pics.

 

[EverythingAttachments]

If you want to convert your loader to QA, we offer the WR Long and ATI Quick Attach adapters. For your tractor, the ATI would be the best choice because it only weighs 76 pounds, whereas, the WR Long is closer to 130.

We do not offer blades that attach to your bucket, but WR Long offers snow blades with manual or hydraulic angle. They will build them with universal quick attach or with a pin mount that will attach just like your current bucket.

For the QA adapters, ground shipping is free to your home within 1,000 miles of Newton, NC. The blades ship free to a commercial business or supporting freight terminal within 1,000 miles.
Travis

 

[tcreeley]

If you want to convert your loader to QA, we offer the WR Long and ATI Quick Attach adapters. For your tractor, the ATI would be the best choice because it only weighs 76 pounds, whereas, the WR Long is closer to 130.

We do not offer blades that attach to your bucket, but WR Long offers snow blades with manual or hydraulic angle. They will build them with universal quick attach or with a pin mount that will attach just like your current bucket.

For the QA adapters, ground shipping is free to your home within 1,000 miles of Newton, NC. The blades ship free to a commercial business or supporting freight terminal within 1,000 miles.
Travis

:thumbsup::thumbsup::thumbsup:Good company here- bought a pto shaft this summer from them!