"SUPER LOAD" came through my area.

[ben2go]

"SUPER LOAD" came through my area.New Pics

Super Load came through my general area tonight.I had to go see it.It's a giant stator for a Duke Energy power plant in Boiling Springs,NC.Here is the LINK to news footage.All the updates are listed below the video.I have helped move some big stuff, but this is by far the biggest thing I have ever seen on wheels.

Here is my crappy cell phone pic.The digi cam was dead.The movers made a trail through the woods around it.It was too dark to get a good pic.Tomorrow I leave for Slemp,a coal mining village in Kentucky,that's where the other half of me is from.Yep,I am married to a coal miners daughter.The stator will be moving Sunday.They will close I-26 around exit 5 to Campobello.

Link

 

[scgargoyle]

I've been reading about that- something like 1.7 million lbs and 750 feet long!?

 

[charlz]

The number of tires they have under that thing is impressive! Making sure they are all properly inflated could be an all day job!

 

[dmccarty]

I sure hope this thing works when it gets to its destination....

I would hate to see the return post and the restocking fee.....

Later,
Dan

 

[jimmyj]

Wow, that is impressive. It makes you wonder why they don't build giant stuff on site.

 

[Western]

Looks like something that would show up when my wife is re-arranging the house..

 

[ben2go]

New pics.

My youngest sone next to one of the pulling trucks.There are a trucks,four pulling and four pushing.The really big pulling trucks have huge weights on the frame between the 5th wheel and cab.
Link 1

The stator cradled in the crawler.
Link 2

 

[Taylortractornut]

Thats got to be the heaviest load ive seen moved. ive never seen the jeep axles cause a truck in the first pic get the truck tail heavy. The jeep ususally just floats on the truck. like a smaller trailer. Ans the chains from the drawbar on the trucks runs up high on the next tractor to hold the nose down is something else. I like the 50 000 pound planetary axles on the other pic, thats a mean truck. I used to have to move a truck crane with axles like that. It only weighd in around 100 000 pounds in total.
I bet shifting everyone in synch is fun with that setup. We recently had a 3 loads come in with a few loads of a press going to a Toyota plant in Alabama. Dad and I were comming home from work when he called me to tell me that an escort came through with a clearance pole on it. About 3 weeks later my wife and I saw the trucks some through the light at the bypass and both were pulling a funny set of trailers. Well one was a tralled and the other was some doubled quad dollies. From the sounds of them they were high output rigs. A few days later I was comming home and the cops were pulling folks off the road an our little road was busy. I saw the trucks on the main road and went to see them. The whole thing had 80 or so wheels. One truck pullig and one pushing. Dad lives on the main hwy and I called him and hes saw them up close to. Then as second load came through and the 3rd load came in and had to go down the little Golden road in Belmont MS I was just getting off work and took a few pics and went around it to see how this low set thing was gonna cross the railroad tracks there. It jacked up with and inch to spare.
i talked to one of the drivers at a rest area and he said that the the port nearest the plant wanted a million dollars a day to tied up the dock there for a few weeks while the one here was way less per day. So much so they trucked it a couple hundred miles. This rig had 4 dollies up front and went frome shoulder to shoulder. I think it was only 300 000 pounds.

 

[ben2go]

I started the threads so the same thing that is here is there plus different responses with other pics n vids.

Duke Energy Stator Parked in Campobello, SC on Flickr - Photo Sharing!

Machine Builders Network

http://mytractorforum.com/showthread.php?t=104947

 

[Redbug]

There was an article in our paper about the move. It took weeks because of all the permitting, power lines and things that had to be moved, scheduled when people would least likely be on the roads. The article even said that they had problems with people trying to block the route and chain themselves to the rig.

Here's a link to the maker of really big trailers and their capabilities. Take a look in their "photos" section. Unbelievable! Fascinating!
Harley Murray Inc. - Toll Free: (800) 466-4434 - Equipment Hauling, Trailer Manufacturing, Sales, Rentals

Taylor...Now I know what a "jeep" is. I didn't know until I browsed the Murray website.

 

[ben2go]

There was an article in our paper about the move. It took weeks because of all the permitting, power lines and things that had to be moved, scheduled when people would least likely be on the roads. The article even said that they had problems with people trying to block the route and chain themselves to the rig.

Here's a link to the maker of really big trailers and their capabilities. Take a look in their "photos" section. Unbelievable! Fascinating!
Harley Murray Inc. - Toll Free: (800) 466-4434 - Equipment Hauling, Trailer Manufacturing, Sales, Rentals

Taylor...Now I know what a "jeep" is. I didn't know until I browsed the Murray website.

people were arrested here for chaining themselves to the trailer.

 

[Robert_in_NY]

I got to see a nice truck come through Sherman, NY today carrying an oversized load. It was no where near that big but had the escorts and was a heavy haul trailer with jeep and stinger so it was quite long. I had an aerial view of it which was nice as I was at the window of the second floor at the street as it drove by (old time buildings right on top of the street)

 

[Redbug]

All I can say is Wow! That load may have been carried by one of these...
http://www.goldhofer.com/gh-en/modular-vehicles/modular-vehicles.php

Goldhofer AG | Combination options

 

[Taylortractornut]

Dave I was on a small job with a contractor taking out some super I beams from a bridge. They were inch and a half thick with a 48 inch web and and the palates were 12 wide. I had a yng lowboy driver asking why we thought we could haul it on a set of Jeep axles when they said they weighed in at 250 000 pounds each. He wondered till the truck came in and we started unloading. They are known by other names to and by their configurations. Ive not been around them enough to know them all.
I have a friend that hauls wind turbine blades. We hese the taildriver. he has an old Frieghtliner cab over with the cab removed and the fith wheel sits a bit more forward thant the standard truck. the operator sits beside the frame right behind the steering wheel and infront of the front tandem.
He steers over the wide corners and crab steers when passing. This winter Im gonna help put and automatic transmission in another one to make the shifting easier.

 

[Redbug]

I'm interested...Take some pictures and post them for us to see when you work on it, Taylor.