Skid pro Brush cutter

[Skidpro]

To vwguy0724 -
This is the owner of Skid Pro Attachments, I found this post when a past customer stumbled upon it and became confused of this allegation.. We have NEVER, I repeat NEVER had a customer replace a drive shaft 4 times, nor 3 times nor 2 times. We have over 3,000 of these mowers in circulation and have had a reported 9 broken shafts in the history of our cutter design, most of which were from abuse. We offer a no nonsense 2 year warranty on all components including the shaft and stand behind our product 100%. If this is truly a customer of ours who has had unreported issues I urge you to call us at 877-378-4642 so we can right whatever wrong has occurred, if this is simply competition trying to drag our name through the mud I have the phone numbers of 3,216 happy brush mower customers.

 

[Skidpro]

To Mactrade-
We at Skid Pro would NEVER allow a customer to be out of commission for 6 weeks. In the rare cases of any warranty work we always have our customers up and running within 4 business days tops. I will stand by my product 100% and if you have had issues I urge you to report them directly to ownership, The Industrial brush cutter is fully capable of handling 6" brush aggressively and over years of time. Please call me directly at 877-378-4642 if this has not been the case and we will talk on how to properly operate the mower. I am judging by the date of this post you are still under our two year warranty and we will still stand behind our product.

 

[rackmaster2]

I have had my skid pro since April and have had the fly wheel fall off. The motor twist off and the bearing housing almost twist off. The cutter has been down over that last six months for about six weeks. The guys at skid pro told me that my case was isolated and told me that they don't know why it would happen. They told me to weld the bolts down. I don't think it can handle what they advertise which is 6". I would not recommend skid pro.

did your issue with the skid pro industrial cutter ever get resolved?