Shackle size - 770 drawbar?

   / Shackle size - 770 drawbar? #1  

BobT_770

Bronze Member
Joined
Mar 7, 2007
Messages
55
Location
Wash DC Metro
Tractor
Deere 770
Sorry for the thread but I hope to get a shackle today and I neglected to bring or measure my drawbar when I left the house:eek: . I aim to buy a shackle that will 'span' the thickness of the drawbar and allow me to attach a cable for skidding some logs. Thanks!
 
   / Shackle size - 770 drawbar? #2  
hey Bob it's gotta be an inch and a half.. mine isn't with me either though?
 
   / Shackle size - 770 drawbar? #3  
The drawbar on my 4410 is 1" thick by 2" wide with a 1" hole hope this helps you in time.:)
 
   / Shackle size - 770 drawbar?
  • Thread Starter
#4  
Thanks! I finally measured it here so I'm ready to find a shackle. My bar is 1.25" thick and 2" wide with a 1" 'main' hole (plus 2 additional holes not including the one that allows it to be pinned to the tractor). Irwin, you were on the mark, thanks!
 

Tractor & Equipment Auctions

Quick Attach Pallet Forks (A47384)
Quick Attach...
2018 INTERNATIONAL LT625 SLEEPER (A51222)
2018 INTERNATIONAL...
Yale 50LX Cushion Tire Forklift (A49461)
Yale 50LX Cushion...
2014 International Durastar 4300 Terex BT3063 30,000lb 63ft Crane Truck (A50323)
2014 International...
2006 FORD F750 XLT SUPER DUTY SERVICE TRUCK (A51243)
2006 FORD F750 XLT...
2018 Rock Solid 8x28 Cargo Trailer - Generator & A/C, Work-Ready (A52128)
2018 Rock Solid...
 
Top