Rory_Rhodes
Silver Member
I have an RTV900, 115 hours (some of which was a key left on). This weekend I noticed a rattle/buzz coming from the transmission. It sound like a metal rattle, but after lifting the bed, nothing appeared to be loose. This RTV transmission was rebuilt by a Kubota dealer last year after a warped pressure plate issue. It has less then 20 hours since the rebuild. The drive shaft rattle issue has been discussed on this board since I joined years ago. Is it possible that I now have this issue? If so, can anyone accurately describe it? Where does the noise orginate. Also, may be just me, but the RTV stops harder now then before. I bought the coast valve off eBay but have never installed it. The RTV does have the hydrauilc dump bed..
Any help/advice would be appreciated.
Any help/advice would be appreciated.
