rim exchange

[jiggs]

I am looking for a rim that will interchange with the six hole patteren of the first kubota . we are talking old here. The lug bolts are on three inch center so if any one knows of a rim that will swap with these please let me know. I had thought the old six hole chev'y would work,,, not so. they are two and three quarters center. I found this Jewel in a tree grove and it has not run in years but the motor does turn, however there are many months of work involved in the restor. have to cut trees out of the frame to load.. this is why I need some old wheels to put on to help loading. thanks

 

[Junkman]

If you just need something to get you out of the woods, then just cut some new holes in a old rim with a torch. Just need enough to get the lug nuts on. I assume that the old wheels are missing? I know that there are companies that will drill any hole pattern on a wheel if you supply the specifications. I will have to do some research to find them again. I needed a wheel once and a friend told me about this. I eventually found a used one at a flea market, so I never actually used the service. Good luck and how about some pictures before and after.... Junk...

 

[Inspector507]

Might try Hey Wheel for a permanent replacement.

 

[ZackaryMac]

I too am looking for wheels to fit the B6100 that has the same bolt pattern as yours. Finding wheels around here is not easy. If I ever find a alternative-application replacement, I'll let you know.

 

[jiggs]

thanks to all. I have wrote Hey wheels and exspect and answer soon. I will get some picks and post for all to see when I go and cut it out of the woods. should prove very interesting. Paul. /forums/images/graemlins/smile.gif