sruman
Silver Member
Is there a trick to getting this off? It's the cover/case of the housing of the 4WD lever directly below the seat, secured by about bolts. I've removed the bolts, beat on it with a hammer to try and get it free, but cannot. Before moving to the chisel, I wanted to make sure that there's nothing I'm missing, or a trick / tip that you could supply.
I'm removing the case to determine why the 4wd isn't working. When moving the lever, it feels and sounds it is working properly. I can feel it slide underneath, or at least it appears to do so. Once the lever is in the 'up' position and engaged, the 4wd doesn't turn the shaft.
I'm removing the case to determine why the 4wd isn't working. When moving the lever, it feels and sounds it is working properly. I can feel it slide underneath, or at least it appears to do so. Once the lever is in the 'up' position and engaged, the 4wd doesn't turn the shaft.
