regarding tire air pressure

[pcerra]

Hello again

Can someone tell me the proper inflation of the tires on a T5C?

Thanks
Pat

 

[pcerra]

Travis thanks for the answer. I did check the sidewalls and unfortunately the writing is worn away front and back. The rear tire says something about taking the pressure over 36psi to set the bead. I did not see any working pressure listed. I set them to 30psi. Not sure if that is good or bad. I set the front to 32psi cause I think I could see 32 on the warn off writing. It could have been the year is was made, smile. Whatever shipped on a T5C from the factory is still on there. The machine is prob 20+ years old. Does that help to get a guess?

 

[ssteudtel]

Let Travis have the serial number that way he can look up what year yours was built, that might give a clue...

 

[pcerra]

Travis.

My machine S/N is 540723. Thanks for the help identifying what it shipped with and when it was built.

Pat

 

[90cummins]

If it's 4wd I would drive it down a straight road and adjust the tire pressures so the 4wd does not bind. The factory pressures are a good place to start but you can find tune the pressures to eliminate driveline bind.


Tim