Rear Remote Hydraulics kit for a BX2200

[tomnky]

Does Anyone know if Kubota has finally offered the kit for rear remote hydraulics for the BX2200?

The last I got from a dealer early this summer was that it would soon be available, Just wondering if Kubota is offering it now or Has it died with the upcoming change of Models? /forums/images/graemlins/confused.gif

 

[jrlichina]

I have posted the individual part numbers to do it yourself. I posted it a long time ago so just do a search on BX2200 rear hydraulics or search on my posts.

 

[equipman]

tomnky
The part number for the rear remote hydraulic valve kit for the BX series is BX7322. The hose kits are BX7232 for tractor equiped with a loader and BX7324 for tractors without a loader. This is for a standard dual acting valve. Hope this helps.
Lewis

 

[TWINKLE_TOES]

Lewis, do you have the part numbers for the B7500 remote kit? Thanks in advance.

 

[tomnky]

Thank You Very Much Lewis!

I am soon to have a four-way valve and front end hydraulic angle blade installed .In this case which hose kit would apply?
Thanking You in Advance,
Tom

 

[RonR]

Thks for the part numbers. Before I start searching for the kit, a couple of questions if you know please:

Does this kit put a control valve handle on the BX platform, like in the extra slot? Or is it mounted on the rear somewhere you mount the valve?

When you mention hoses, does this mean the kit "T's" into the line on the loader hookup somewhere?

Thanks for any info you can provide.

Ron

 

[pcmem]

Ron,

The valve body attaches to the the ROPS, not through the BX slot.
If you have either loader valve (3 or 4 way) the aux hydro block is installed and the hoses to connect are different. It isn't so much a "Tee" as it is added to the power beyond circuit. This is the same valve and connection for the quick hitch. It is just installed on a pillar mount instead of the loader arm.

You may want to review jrlichina's post for his custom install,
Added rear hydraulics to BX2200
if you want to do it yourself or opt for dual circuits.

Enjoy,
Michael

 

[tomnky]

I understand the actual flow rate at the remote is something like 3.7 gpm at the remote valve even though the tractor specs. say it is something like 5.5 gpm.My question is this : What does that translate into psi?

The reason I ask is the Ryan tow behind aerator with a hydraulic lift requires something like 700psi to operate the transport wheels. Does anyone have an educated guess on this?

Thanks,
Tom /forums/images/graemlins/smile.gif

 

[jrlichina]

The system pressure operates at 1950-1980 psi.

 

[tomnky]

Thanks jrlichina,
I am grateful for the info as All I have is the service manual to go by and it doesn't give a specific pressure just what pressure operates the relief valve.

Thanks Again ,
Tom