jwmorris
Veteran Member
- Joined
- Oct 3, 2007
- Messages
- 1,194
Had the engine mount part of an Abrams engine crate left over from a previous project as well as a 12 bolt Chevy truck rear end.
Thinking of making a face plate for the yoke and converting it over to run a PTO roller pump. And some fold out truss style booms.
Happens to be the perfect size frame to hold a 330 gallon tote, I also happen to have.
I won't be getting the full 20 gpm out of the pump but I only need ~2.75 gpm for 10 GPA and 4.85 gpm for 20 GPA, with 15 nozzles on 20" spacing.
Thinking of making a face plate for the yoke and converting it over to run a PTO roller pump. And some fold out truss style booms.
Happens to be the perfect size frame to hold a 330 gallon tote, I also happen to have.
I won't be getting the full 20 gpm out of the pump but I only need ~2.75 gpm for 10 GPA and 4.85 gpm for 20 GPA, with 15 nozzles on 20" spacing.
Last edited:
