price check on 2720

[wango tango]

wondering if 20k is a good price for a 2010 2720 with 200cx loader and 62" belly mower (new). 42 hours.

also, what could i expect for a trade in on my 4410 with 430 loader, 72" john deer 3 pt finish mower and 660 hours? its in fair condition, front tires are worn.

i'm realizing i need a mower more than a heavier duty tractor. some light loader use and assume this could run my 5" tiller as well as my 4410.

tia!!

 

[charleyfarmall]

That's a good price. Go to Deere's site and build one and you will see that with that combination you are somewhere near $24K on a brand new machine.

 

[wango tango]

if i'm not mistaken, many say 85% of list is a good price (according to many of the threads i've read on here). and 85% of 24k is 20400. so in that aspect, this price seems high.

thoughts?

anyone know of a JD dealer in the midwest who does just a flat out price, no haggling/bs involved?

 

[wango tango]

ttt for the day - am i wrong in my thinking?

 

[JDGreenGrass]

Personally, I wouldn't buy the used 2720 if it wasn't below the price of what I could get a new 2520 for.

I wouldn't pay much over $18000 for the 2720.

 

[RoyJackson]

also, what could i expect for a trade in on my 4410 with 430 loader, 72" john deer 3 pt finish mower and 660 hours? its in fair condition, front tires are worn.

As a trade, I think you'd see somewhere between $10K and $13K. If you sell the 4410 privately, you might get up to $15K. If you want the top dollar, I suggest you replace those front tires.

Also, talk to your local Deere dealer about repossessed 2720s. Unfortunately, repossessed tractors are becoming more common (I saw a repo'd Deere CUT this morning, in fact, while I was at my dealer. It was a 2000 series machine, but I don't recall which model it was though.

 

[dkostiha]

That seems high to me, but it depends on part of the country you are in. You can check on Tractorhouse.com for prices in your region. I bought a 2010, 3120 with 100 hours with 300 cx loader and shredder for $15k in January.

 

[charleyfarmall]

It really depends on where you are. In some places you may get 15% off the list price. In others, you won't. You might not make it to 10%. The Northeast is expensive for example. I actually had one dealer quote a jacked up list price then discount it back to Deere's list. He didn't even print out a break down of it.

The dealer I bought my 2720 from printed out a line item breakdown then the discount per item. As I recall shipping and setup were about $700 total.

 

[wooden]

I have a 2010 2720 with a 62d MMM , 200CX FEL, 5' Tylor way Bushhog , Independent lift kit on the MMM, power beyond kit, All total was $23,500.00 That includes the SCV connections for the lift kit.

I think your price on a used machine is high. Go there with your check book in hand and write him a check for 2K less. Place the check face down on his desk and leave a phone number. It will fly!! let him see you write the check but don't let him see your price till you leave.

 

[OneMarineE5]

I have a 2010 2720 (23 hours) with 200CX (63" Buck), backhoe, I-Match, JD ballast box and accessories I'm asking $21,000.00 for. Dealer told me my price isn't unreasonable.

The backhoe cost a little more than the mmm, but I'm asking a little more than the one you are looking at.

Wooden might be offering some good advice!

Good luck and hope you get your 3000 series!