jcb67
New member
Need suggestions and resource information on pallet forks for my 2004 Branson 4220 with loader. Thanks, John
Pallet Forks for Branson
- Thread starter jcb67
- Start date
- Views: 17737
MarEng
Silver Member
Same question - different guy.
I have a 2004 BL10 loader on a 3510. In 2004 Branson used the pinned QA not the skid steer arrangement. I was recently told by one dealer that the early QA was a Euro Mount. I just tried to buy a set of Euro Mount forks and was told there would be too many changes required for them to fit the Branson.
Questions:
1) Did Branson use a Euro Mount QA before the skid steer?
2) Does anybody have a source for a set of forks that will fit the Branson BL10 - old style QA?
I tried Everythig Attachments and he's backorderd until Early August. Would like something sooner.
Your help - as always - appreciated.
Brgds, Will.
I have a 2004 BL10 loader on a 3510. In 2004 Branson used the pinned QA not the skid steer arrangement. I was recently told by one dealer that the early QA was a Euro Mount. I just tried to buy a set of Euro Mount forks and was told there would be too many changes required for them to fit the Branson.
Questions:
1) Did Branson use a Euro Mount QA before the skid steer?
2) Does anybody have a source for a set of forks that will fit the Branson BL10 - old style QA?
I tried Everythig Attachments and he's backorderd until Early August. Would like something sooner.
Your help - as always - appreciated.
Brgds, Will.
MarEng
Silver Member
Ordered a set of Branson forks. They were only $50 more than the locally and promptly available generic forks. They will take a week longer to deliver from GA versus local fabrication.
Hi:
If you need pallet forks for your older Branson or Century wit hthe pin on system, I would suggest contacting a dealer that caries Aldomi attachments. They have a web site at Welcome. I ordered a pair of their adjustable forks for my 05 Century 2535 and they were perfect. A little more expensive than some, but extreemly heavy duty and as a bonus, made in USA.
If you need pallet forks for your older Branson or Century wit hthe pin on system, I would suggest contacting a dealer that caries Aldomi attachments. They have a web site at Welcome. I ordered a pair of their adjustable forks for my 05 Century 2535 and they were perfect. A little more expensive than some, but extreemly heavy duty and as a bonus, made in USA.
MicroPilot
Veteran Member
blueriver
Super Member
- Joined
- Oct 4, 2007
- Messages
- 5,012
- Location
- S.E.Oklahoma
- Tractor
- JD 5520 Montana 4340 Farmall Super A Montana 5720C
I would change it over to the QA for skid steer ... so many more atatchments available ...
Yalerider
Silver Member
Wonder if there is a changeover kit available and how much?
blueriver
Super Member
- Joined
- Oct 4, 2007
- Messages
- 5,012
- Location
- S.E.Oklahoma
- Tractor
- JD 5520 Montana 4340 Farmall Super A Montana 5720C
I believe so ... just got an email from Nelson Long at wrlonginc.com .... by the looks of it pull the loader pins remove your and put his on $595
There is also an Euro->Skid Steer adapter - - around $700 if I recall.
More money, but probably worth it if you still have a Euro bucket and/or other FEL parts that you want to keep.
It is also "generic" in that it isn't matched to a particular FEL bushing size & spacing, just Euro interface to SS interface.
More money, but probably worth it if you still have a Euro bucket and/or other FEL parts that you want to keep.
It is also "generic" in that it isn't matched to a particular FEL bushing size & spacing, just Euro interface to SS interface.
