NH TC29DA and the "Project"

/ NH TC29DA and the "Project" #1  

jbrumberg

Elite Member
Joined
Jan 22, 2006
Messages
4,903
Location
Cummington, MA
Tractor
New Holland TC29DA, John Deere D130
NH TC29DA and the \"Project\"

To All:
I know alot of you like pictures. The following attachments are of my tractor which is not dirty enought yet and the "Project". It is the beginning of mud season I have just taken out the worst of the ruts. I reallly have to wait until things dry out. Jay
 
/ NH TC29DA and the "Project"
  • Thread Starter
#2  
Re: NH TC29DA and the \"Project\"

The "Project".
 
/ NH TC29DA and the "Project" #3  
Re: NH TC29DA and the \"Project\"

Sorry, I can't seem to find the attachment?? BobG in VA
 
/ NH TC29DA and the "Project"
  • Thread Starter
#4  
Re: NH TC29DA and the \"Project\"

BobG in VA: Bob sorry about the attachments- they were too large. I will reshoot tomorrow. Jay
 
/ NH TC29DA and the "Project"
  • Thread Starter
#5  
Re: NH TC29DA and the \"Project\"

BobG_in_VA:
I hope these pictures fly. Jay
 
/ NH TC29DA and the "Project" #6  
Re: NH TC29DA and the \"Project\"

Nope, not coming up. I have had problems viewing pics with only one other member post. Not sure if it's the size of your file or what you are using to post it with. If it's size, it should tell you when you try to attach it that it's too large.
Anyway, would love to see 'em as I am making my share of mud as well! Must have scraped 8 yards of topsoil from behind the garage and am still not down to the hardpack yet! I need to make an access path to the woods that I can cover with crushed stone. Not much to see yet, but I'll put up some pics pretty soon!
 
/ NH TC29DA and the "Project"
  • Thread Starter
#7  
Re: NH TC29DA and the \"Project\"

BobG_in_VA:
 

Attachments

  • 851784-DSC00472_edited.JPG
    851784-DSC00472_edited.JPG
    40 KB · Views: 365
/ NH TC29DA and the "Project"
  • Thread Starter
#8  
Re: NH TC29DA and the \"Project\"

BobG:
 

Attachments

  • 851823-DSC00473_edited.JPG
    851823-DSC00473_edited.JPG
    65.1 KB · Views: 326
/ NH TC29DA and the "Project"
  • Thread Starter
#9  
Re: NH TC29DA and the \"Project\"

BobG:
I feel like a stalker with this picture business, but it appears that I am getting better at reducing and cropping the pictures. My pictures do not give justice to the driveway, in past years my wife has gotten her Subaru stuck and one year I had to come-a-long my Ford 1000 (4WD) tractor out of the muck. Hopefully this last picture will fly- my tractor. Jay
 
/ NH TC29DA and the "Project" #10  
Re: NH TC29DA and the \"Project\"

Gonna have to try again with the last one...
 
/ NH TC29DA and the "Project" #11  
Re: NH TC29DA and the \"Project\"

You're 2 for 3.....nasty lookin' stuff....Bobg in VA
 
/ NH TC29DA and the "Project"
  • Thread Starter
#12  
Re: NH TC29DA and the \"Project\"

BobG_in_VA:
Bob it's obvious that I do not give up on this picture business. I believe I get the file sizes down to limitation parameters, but they do not always "fly"; maybe it's a function of picture width. I will try to send the picture of my tractor as a test. Most of the mud has come off due to some recent showers; the rain does not do much for the bird poo- this is how they show their appreciation for the 400#'s of feed I provide them before and after "bear season". Anyways this has been one of the driest Mud Seasons in recent memory. I have been able to keep the ruts managable by backgrading. Jay
 
/ NH TC29DA and the "Project"
  • Thread Starter
#13  
Re: NH TC29DA and the \"Project\"

Bob: I am starting to talk to myself on this. Jay
 
/ NH TC29DA and the "Project" #14  
Re: NH TC29DA and the \"Project\"

What program are you using to shrink them? There are some (like Photoshop) that make non standard .jpg files that can not be read/displayed on the internet.
 
/ NH TC29DA and the "Project" #15  
Re: NH TC29DA and the \"Project\"

Ruts? Those ain't ruts...

Theeeeessseee are ruts.

large.jpg


j/k good luck man. I have my work cut out for me as well.


For pictures, I pay $20/year to host 'em at pbase.com. Really easy interface and then you don't even have to use attachments. Just an idea.
 

Marketplace Items

2016 Dodge Charger Sedan (A59231)
2016 Dodge Charger...
30x57 Welding Table (A65640)
30x57 Welding...
John Deere 7000 4R Wide Planter (A66285)
John Deere 7000 4R...
2021 Takeuchi TL10V2-2 Track Loader with 76in Tooth Bucket (A63689)
2021 Takeuchi...
Gehl Mix-All 95 Grinder Mixer (A66408)
Gehl Mix-All 95...
Informational Lot - Shipping (A63689)
Informational Lot...
 
Top