need to buy 48 rotary cutter...

[santurinos]

Hello Friends,

I am looking for a new 48 rotary cutter (bush hog) for my Kubota B7500. I live 10 miles north of Buena Vista, GA and could pick it up about 100 miles of 31803.

I have some cash and looking for a bargain

Thank you for your help - santurinos

 

[RoyJackson]

Used 48" cutters aren't too common, but try out your local Craigslist and any local papers.
As far as new, Tractor Supply might be your best bet. Don't be surprised if they have to order one for you though.

You know, your B7500 could handle a 60" cutter...easier to find new and used.

In use, you may have to go slow (with a 60" cutter) if there's thick and tall brush and you may have to make partial width passes.
Something to consider...

This is something I posted in another, but similar, thread:
My cutter, a 10 year old Land Pride 5' unit, was purchased for a small Deere (17 PTO HP). I thought it would be too big. The dealer (who was also a Kubota dealer) said they sold a fair number of the same cutter for the B7500 Kubotas which was less the 2000 lbs and about the same PTO HP. The dealer was right...that cutter worked fine.
If all your mowing is heavy brush, you might want the 4' cutter. But if it's a mix of thick stuff and lighter stuff, like mine was at the time, go with the 5' cutter and make partial width passes.