NCFarmLife
Member
- Joined
- May 9, 2018
- Messages
- 30
- Tractor
- Mahindra 4540
Hey ya'll...
Anyone have experience with the Brush Hog PHDHF15 or HF20? I've been looking at it for my Mahindra 4540. (4WD)
Bush Hog recommends 10 gph minimum for the HF20 and the Mahindra only puts out 8.7 according to the specs. Would it still work or would I be putting too much stress on the hydraulic system?
***EDIT: I found this additional information - "Hydraulics run through an open center system with 5.8 gpm going to the power steering system and 8.7 gpm to implement requirements (14.5 gpm total)"
2 16 Mahindra 454 Review
So, now I'm not sure what its actually rated at??? I may call the dealer here in a bit to get clarification.
I have about a mile of fencing that is going to need fixing/reconfigured over this spring, plus an orchard to put in.
Anyone have experience with the Brush Hog PHDHF15 or HF20? I've been looking at it for my Mahindra 4540. (4WD)
Bush Hog recommends 10 gph minimum for the HF20 and the Mahindra only puts out 8.7 according to the specs. Would it still work or would I be putting too much stress on the hydraulic system?
***EDIT: I found this additional information - "Hydraulics run through an open center system with 5.8 gpm going to the power steering system and 8.7 gpm to implement requirements (14.5 gpm total)"
2 16 Mahindra 454 Review
So, now I'm not sure what its actually rated at??? I may call the dealer here in a bit to get clarification.
I have about a mile of fencing that is going to need fixing/reconfigured over this spring, plus an orchard to put in.
Last edited:
