Napa / wix /Part # for BX 25

[neatoooo2001]

Does anyone have the Napa or Wix or other manufacture Part # for the following filters for a BX25

AIR FILTER
GAS FILTER
OIL FILTER
HYD, TRANS FILTER

Alot of talk of the subject but not alot of part numbers listed, looking for information from a person who is actually using the filters on their machine
and have had no problems with them, info appreciated, thank you.

 

[oldnslo]

have you tried taking the Kubota part numbers and then going the Wix sight to see if will provide a cross over? Worked for BX1850

 

[deezler]

You could always, you know, try the wix website.

WIX filters, WIX oil filters, WIX air filters, WIX fuel filters, WIX Heavy Duty Oil Filters : Filter Look-Up

Just bought a boat load of wix filters today myself, from fleetfilter.com.

 

[LRH]

Air: 6449 (OEM K121182320), Fuel: 3972 (1258143012), Engine: 1365 (HH15032430), Hydraulic: 7088 (HHK2036990)



EDIT: These are NAPA Gold; for NAPA Silver add a 2 as the first number (most Filters)

for WIX the numbers are 46449, 33972, 51365, and 57088

 

[David_Kb7uns]

If you look at the pictures for the WIX 33972 or Napa 3972 you can clearly see that they are nothing but a strainer screen.........this is not what the BX uses as a fuel filter.

David Kb7uns

 

[LRH]

If you look at the pictures for the WIX 33972 or Napa 3972 you can clearly see that they are nothing but a strainer screen.........this is not what the BX uses as a fuel filter.

David Kb7uns

----------------------------------------------------------------------------------------

I just went by the interchange, and also checked the 2010 catalog I have at home. I did not realize it was just a strainer; and only with a 50 micron rating. Lots of skid steers/other equipment use this or the metal version w/stainless steel mesh as primary filters while using final filters in the 10-30 micron range. Does the BX25 not have the common filter bowl? If it does then perhaps Wix does not supply it, and it is a dealer item.

 

[LRH]

The Kubota site does show quantity 2 of 12581-43012 as the only fuel filter(s) listed; and the Messick's photo shows a 5/16" inlet/outlet plastic bodied inline type filter. The filter housing is translucent vs transparent like the NAPA/Wix. The current Kubota number supersedes about 6 different part numbers used in the past. Several sites show similar inline type filter/strainers to replace the Kubota number, and they are in the 60-70 micron range. To me a 50 and up micron rating is rather large for this day and time with some road tractors using 30 as primary and 5 or 10's as finishing filters.

 

[David_Kb7uns]

The Kubota inline filters I think are a special makeup for the BX and other diesels. Kubota has 2 installed, one in line before the electric pump and one before the injection pump. They also do trap water as I have drained water out of them before.

Was having a bit of trouble on the RTV and put on the water seperator kit and will try to put one on the BX and maybe the G2160 when I get the time but otherwise the small tractors and mowers do not have a bowl type seperator.


David Kb7uns