mitsubishi driveshaft

[flymt]

I am about to seperate my mitsubishi mt3201fd tractor to work on the clutch. Can anybody tell me how to remove the drive shaft.

 

[Kernopelli]

The sub 30HP Mitsubishis usually have a tube or shield on each end of the driveshaft. That has to be removed and the shaft slides onto the yoke of a splined ujoint and held in place with a pin that goes through the center of the shaft/yoke and is held in place by a metal clip. Probably a similar setup on the 3201

 

[flymt]

Thanks Darryl once I got the shield off it was clear how things came apart.