Max26XL anyone have a their 3 point hardware removed because of installed backhoe?

[CHRISROY]

I have a 2015 Max 26XL bought used with a backhoe but i have no 3 point hardware. I priced out what i need from Mahindra and its over $1600 the lift arms are 500 ea. If you have a 3 point not on the tractor I could use the dimensions of the lift arms and turn buckles anything on the 3 point that's adjustable. I would like to see if I can find some reasonably priced universal parts that i can use for a 3 point setup if I remove the backhoe. It would be much appreciated.

I bought a 2816 tlb with no 3 point hardware. Bought after market stuff. Works fine. Cost under 300 3 years ago.

 

[Sawyer26xl]

My 2017 Max 26XL still wears all the 3 Pt. hardware with the BH installed. I bought it from a neighbor that way. The arms and stablizers are still in place with the BH installed,and stablizers just hang where they are and the arms just go all the way up. Should I remove anything for reasons I don't know about? I have removed the BH in the past to use a boxblade and reinstall the BH with no interferance.