LS MT125 tractor looking for fiilters and manuals

[mslisaj]

I have a 2017 MT125 tractor. Looking where I can obtain the shop and parts manuals for it. Also does anyone have a list of the filter (fuel, oil, hydraulic) for this machine. Can't seem to locate this information.

Thanks for the help.

 

[jaydee325]

A shop manual will have to be ordered from your dealer. lstractorparts.com has most parts manuals on line, but they don't have the MT125 parts manual up yet.

Your owners manual has filters listed. A good parts store might be able to cross those numbers. But, I would stick to LS filters while under warranty so there is no question. Aftermarket filters have been discussed ad nauseam on this website. Aftermarket filters may be just fine. I just prefer to stick with stock. Plus, this gives me an excuse to visit my LS dealer and shoot the breezed with them!

 

[LS Tractor Owner]

I have a 2017 MT125 tractor. Looking where I can obtain the shop and parts manuals for it. Also does anyone have a list of the filter (fuel, oil, hydraulic) for this machine. Can't seem to locate this information.

Thanks for the help.

The shop manuals may be ordered through the dealer. Not sure how expensive they are. As far as the filters, I would recommend to stick w/ the LS filters as just stated.. no question about warranty issues... I had my dealer (which is located 500 miles away) send the filters via USPS to me. Cost $7.00 for shipping. Stock LS Filters were not that expensive.

 

[mslisaj]

Thank you gentlemen for taking your time to answer my questions. As I wait for my new tractor to be delivered I'm trying to get everything lined up and ready.
Regards,

Lisa

 

[LS Tractor Owner]

Thank you gentlemen for taking your time to answer my questions. As I wait for my new tractor to be delivered I'm trying to get everything lined up and ready.
Regards,

Lisa

Don't forget.. It's MANDATORY that you post pics when you get it! :dance1:

 

[mslisaj]

Oh you can count on it. I don't expect the tractor for about 4 weeks as its coming cross country but when I get it I'll post the pictures for sure.

 

[mslisaj]

I contacted my dealer and got a strange response. I was refered to lstractorparts.com for parts and as noted here they don't have a parts list for the MT125. The dealer didn't offer to sell me service manuals either and left me thinking that LS hadn't printed or produced them yet. Anyway, the dealer where I purchased my machine was no help - Strange...........
I also gather from the lack of response here about manuals and cost that no one has a set yet. For me the cost isn't the issue as much as having the access to the information is very important.
At anyrate I'm still looking.

 

[ThirdMan]

When buying my MT125 I did ask the dealer about service manuals. He seemed surprised that I would even ask and did not show any interest in getting a copy for me to purchase. If the owners manual specifies a part number for any of the filters I have not found it.

I did finally figure out where the 886 lbs. lift capacity of the loader number comes from. It is on page 4-27 of the owners manual in the section titled, "Recommended Maximum Specification of Implements". It says not to attach a loader with a max lift capacity of greater than 886 lbs. The LL1100 manual says the lift capacity is 1,005 lbs. LS screwed up that documentation in some way or they are selling a machine that does not follow their own suggested limitations.

 

[jaydee325]

Well, I stand corrected. I rechecked my R3039H owners manual and could not find oil filter part numbers either. Could have sworn I saw them.

If there is anything disappointing about my LS, it is the manual.

 

[LS Tractor Owner]

I contacted my dealer and got a strange response. I was refered to lstractorparts.com for parts and as noted here they don't have a parts list for the MT125. The dealer didn't offer to sell me service manuals either and left me thinking that LS hadn't printed or produced them yet. Anyway, the dealer where I purchased my machine was no help - Strange...........
I also gather from the lack of response here about manuals and cost that no one has a set yet. For me the cost isn't the issue as much as having the access to the information is very important.
At anyrate I'm still looking.

I have the numbers for the engine, HST, and hydraulic filters out in the shop. I just got in from work and got changed already... It got cold outside real fast.. I'll get them for you tommorow and post them. Also, if your interested, my dealer has them in stock and will ship them out via USPS or UPS. They are "Legacy Tractor" out of Ft Collins CO. 1-970-482-4803.