looking for help with my 7TL FEL Joystick

   / looking for help with my 7TL FEL Joystick #1  

madhouse

Bronze Member
Joined
Nov 17, 2013
Messages
82
Location
Minnesota
Tractor
Bobcat CT230
I was using the FEL and noticed that the joystick seemed extra sloppy. Then it went completely wonky! I have torn it apart and found that the back left gizmo that the joystick pivots on is loose. I'm assuming that I simply need a bolt in the bottom of that gizmo to make it work. I need to know what size bolt is needed. Any help would be appreciated.

There are three gizmo's in the joystick assembly. Two of them are connected to the cables going to the valves. The third and the one in question - as far as I can tell - is simply there to be the pivot point for the operation of the joystick.
 
   / looking for help with my 7TL FEL Joystick #2  
It does not show a size for the screw in the shop manual.

image-1560248133.jpg
 
   / looking for help with my 7TL FEL Joystick
  • Thread Starter
#3  
T-man, Thanks for the reply.

Your picture proves that my conclusion was accurate which makes me happy. Now, back out to the shop to dig through my bolt supply and see if I can get lucky. There isn't much snow in the forecast but I would like to be ready.
 
   / looking for help with my 7TL FEL Joystick #4  
👍 you're welcome and merry Christmas
 

Tractor & Equipment Auctions

2021 Delta Redirective Crash Cushion 75000 (A49461)
2021 Delta...
2019 VOLVO VNL HIGH ROOF SLEEPER (A50046)
2019 VOLVO VNL...
2015 WACKER NEUSON LIGHT PLANT (A50854)
2015 WACKER NEUSON...
2006 Ford Crown Victoria Sedan (A50324)
2006 Ford Crown...
2009 Peterbilt 384 T/A Wet Kit Day Cab Truck Tactor (A50323)
2009 Peterbilt 384...
2008 Ford F-250 Reading Service Truck (A50323)
2008 Ford F-250...
 
Top