lk3054 valve clearance

[gdschwer]

Does anyone know the valve clearance spec for an lk3054?

I have an exhaust valve that currently has no gap, and I would like to get that sorted out....

Thanks

George

 

[Patches]

Measure clearance with the piston at TDC; the clearance is 0.18 to 0.22mm or 0.0071 to 0.0087 in. when cool. Seeing as no feeler gauge has ten thousandths capability, and neither do you, you're looking at 7 to 9 thousandths. This measurement is for either intake or exhaust valves. Hope this helps

 

[gdschwer]

7 to 9 thousandths, exactly what I needed.

That tells me I need to adjust all the valves. .015 is the smallest gap other than the one with zero clearnace.....

Thanks