Tractor Seabee
Elite Member
- Joined
- Oct 5, 2011
- Messages
- 3,896
- Tractor
- Kubota BX25
Always room to learn. I have an old HF 16 speed bench model drill press. This was made back when HF was "Central Purchasing Inc". Even have the instruction manual from then, no date. As HF does not put their address on their web site not sure of their location. Back then it was in Camarillo CA.
I was having problems adjusting the belts (still the originals); the manual was hopelessly short on tech info. Decided to look at the current model HF sells and downloaded that manual. Lo and behold the current model is identical to the one I have. All the parts appear the same. That manual gave me all the info i needed and 10 min later back in operation.
Goes to show when you have a winner don't change horses in the middle of the stream just to be doing it.
Ron
I was having problems adjusting the belts (still the originals); the manual was hopelessly short on tech info. Decided to look at the current model HF sells and downloaded that manual. Lo and behold the current model is identical to the one I have. All the parts appear the same. That manual gave me all the info i needed and 10 min later back in operation.
Goes to show when you have a winner don't change horses in the middle of the stream just to be doing it.
Ron