BParks
New member
The 3-point on my Kubota B1700HD is not working properly. I was pushing snow and noticed that the lever was becoming difficult to move upward to lift the 3-point. It eventually stopped lifting altogether. I discovered a leak in the control valve for the front loader (no loader attached); which lead me to check the hydraulic fluid level which was low. I replaced all the fluid, cleaned the screen, and changed the filter. The 3-point, now, does not start to lift until the lever is pulled about ｾ of the way up. From there, minor movements in the lever cause it to lift rapidly. With the lever pulled fully upward, the 3-point lifts about ｾ of its normal height. Does anyone have any suggestions on diagnosing this issue?
