sparroakfarms
New member
does anyone know the part# for the front hydraulics to operate a grapple for my 2008 john deere 4520 with 400x loader ? I get no where with the dealers
john deere 4520 loader grapple
- Thread starter sparroakfarms
- Start date
- Views: 4134
-
- Tags
- john deere 4520
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,512
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
I'm curious if there is a "part" for this.
Do you have a 3rd SCV now? What is your present setup in addition to the dual SCV for the FEL?
Do you have a 3rd SCV now? What is your present setup in addition to the dual SCV for the FEL?
OP
sparroakfarms
New member
I have a power beyond kit for the backhoe , which is on the tractor most of the time
kennyd
Advertiser
There was a kit, part number BW15260 but I think it's been discontinued. Searching that number here will turn up some older threads with pictures.
It was made the hook into the 3rd SCV connection at the rear of the machine and extended them to the loader, you can do the same with 1/4" or 3/8" hoses too.
This post has some good pics/info: http://www.tractorbynet.com/forums/...ing/130717-hydraulic-hoses-400cx-grapple.html
It was made the hook into the 3rd SCV connection at the rear of the machine and extended them to the loader, you can do the same with 1/4" or 3/8" hoses too.
This post has some good pics/info: http://www.tractorbynet.com/forums/...ing/130717-hydraulic-hoses-400cx-grapple.html