wirlybird
Gold Member
- Joined
- May 20, 2021
- Messages
- 474
- Location
- Oklahoma
- Tractor
- John Deere 3038 E, John Deere 3032E, John Deere 756, John Deere X585, John Deere 332
Purchased for $900 and after a bit of a delay, I finally got the 25A finished up and working.
All new flails and mounting hardware.
Welded cracks in the main housing due to a loose gearbox.
New bearings and housings for the roller.
Set at a 2-inch cut height and it did a great job on a 10-acre field.
Great flail for larger areas but transporting it is the issue. Too wide for a conventional trailer.
All new flails and mounting hardware.
Welded cracks in the main housing due to a loose gearbox.
New bearings and housings for the roller.
Set at a 2-inch cut height and it did a great job on a 10-acre field.
Great flail for larger areas but transporting it is the issue. Too wide for a conventional trailer.
