john deere 24t
- Thread starter rhinomax
- Start date
- Views: 1352
I bought this baler last week could not wait to try it out so I busted some bales today to run through it, tied one time broke both needles and bent a piece on the outside. Looks like I have some timing issues, and don't know anything about john deere balers.
AKfish
Super Member
- Joined
- Oct 1, 2004
- Messages
- 5,420
- Location
- Alaska
- Tractor
- JD 5115M; JD 110 TLB; JD 4720; Ford 9N; JD X300R
That's a rough way to get started..!! 
I've seen several OEM manuals on eBay for the 24t baler. That's usually a bit cheaper than going directly with your local JD dealer.
There are more Ag related users here on TBN over at the Ag Equipment page. They will more likely see your post and offer advice - over there.
Good luck.
AKfish
I've seen several OEM manuals on eBay for the 24t baler. That's usually a bit cheaper than going directly with your local JD dealer.There are more Ag related users here on TBN over at the Ag Equipment page. They will more likely see your post and offer advice - over there.
Good luck.
AKfish
Here are some similar links:
