JD2210
- Thread starter bones72
- Start date
- Views: 2308
-
- Tags
- john deere 2210
rsewill
Veteran Member
Yes.
You can see what the asking price is around the country using searchtempest.com
You can see what the asking price is around the country using searchtempest.com
There have been a lot of sub-compacts listed on Ebay, but few of them are meeting the reserve, a lot seem to be reaching the $7-9K range but struggle to get above $10K, consequently, it seems to me that few sales are completed. That being said, the snow-blower does add some decent value. I think with the low hours, and if the unit is very clean, that $9500 would be a hard to beat price, but, I suspect the seller is not going to be happy. If I were to meet in the middle at $10,250, I would want the unit to be cherry, no sun fade, no beginnings of rust, and most or all of the paint left on the bucket. The SCUT's are desirable, but sometimes like buying a used Honda. You get close enough to new price that there is little incentive to buy used,especially at 0% interest.
However, with the blower, a new 1026R would be approaching if not exceeding $20K. At pricing near $10K, I would be pretty interested myself, so take that into account.
However, with the blower, a new 1026R would be approaching if not exceeding $20K. At pricing near $10K, I would be pretty interested myself, so take that into account.
cast_and_blast
Platinum Member
That is a good price, you've got ~$17K worth of tractor + accessories (and that would have been a really good price to begin with).
If it's not beat-up...
Scott
If it's not beat-up...
Scott
dixstir
Silver Member
dont know if I would jump at that, muttons have the 1026R tractor loader and mower for close to 14500 with warrenty.and the 1023R is about 1.000 less.good used blowers around 400-750 bucks.I dont think you will get any warrenty with a tractor that old.
Dixstir,
You and I are on the same page, the 1023E is for sale at Mutton for $13,599 with the 54" deck and the non-quick disconnect loader. The 1023E is probably the closer comparison to the 2210 than the 1026R. Street price on a new snowblower is about $3K, so the pre-tax price on the 1023E is around $16,600 and that is pretty well apples to apples. That is why I would want to get close to or under $10K on the 2210.
You and I are on the same page, the 1023E is for sale at Mutton for $13,599 with the 54" deck and the non-quick disconnect loader. The 1023E is probably the closer comparison to the 2210 than the 1026R. Street price on a new snowblower is about $3K, so the pre-tax price on the 1023E is around $16,600 and that is pretty well apples to apples. That is why I would want to get close to or under $10K on the 2210.
dixstir
Silver Member
have you thought about a 3 point blower? I think a loader is the way to go instead of the front blower, I have a 2305 with 3 point blower and loader its great .it could be a wash and you would wind up with a loader.I use mine almost every day.my 2305 was $13250 62 inch mower 200cx loader, I would like the 1026 but the dealer said mine was valued at about 11-11.5( thats not going to happened) 166 hours on mine.
dixstir
Silver Member
2210 there is one on craigslist (wis) phone 715 688 9479,cozy cab loader blower rear blade $1050
dixstir
Silver Member
2210 there is one on craigslist (wis) phone 715 688 9479,cozy cab loader blower rear blade and mower $1050
rsewill
Veteran Member
dixstir said:
Correct price:
$11,500
Not a bad price with all the extras.
