JD 4100 power beyond

[matoyan]

I just got a 4100 and I'm interested in installing power beyond for grapple, etc. I've been doing research and I wanted to know if the tractor comes with the M808033 plate that you hook up the hydraulics to already attached to the SCV or do I have to buy one? I've been looking at the kits and they don't have the plate. It's hard to see how everything is connected without taking the tire and fender off. Or is it easier to do the 3rd function diverter kit. Thanks

 

[kennyd]

The plate is there, but you’ll have to add the “plug” or screw to direct the fluid to the OUT port, if you don’t, nothing will work.

Search in the Hydraulics forum for 2520 remotes, there are some good threads there. The 4100, 4110, 2320, 2520, 2720, and gen1 2032 all shared the exact same setup.

 

[loakman]

Kennyd,
Is the 4115 also the same hyd setup as 2520?

 

[kennyd]

Yes, sorry I forgot about that one....

There is a great thread from a member jimgerkin or something like that on his 2520, I can’t search for it now cause I’m mobile. If you use the google search feature you should be able to find it.

 

[matoyan]

thanks guys. that's what I needed to know.

 

[crazylunker]

I have a power beyond kit I bought from Deere for my 4110, I just put the tractor up for sale and if it goes I will be selling the power beyond kit and I also have a rear had kit for top/tilt I bought from Deere for it as well if interested.