jd 110 loader/hoe

[dia480]

Anyone ever moved round bales with a John Deere 110 Hoe ?

ya know lifting with the FEL

Just wondering:licking:

 

[AKfish]

Should not be much of a problem at all!

It's a very HD loader and will lift over 2,000 lbs to full height.

I've been using mine with a honkin' HD root grapple for the past 3 years hoisting some really big trees and root wads.

Round bales would be a "breath of fresh air"!!

AKfish

 

[dia480]

can you get a round bale spear to fit these units front end?

 

[AKfish]

can you get a round bale spear to fit these units front end?

Yup... Just need a Skid-steer mount or the add-on adapter plate. I believe that JD offers one in the Workpro lineup for skid-steers and TLB's. Should be able to find it on their website.

AKfish

 

[CurlyDave]

can you get a round bale spear to fit these units front end?

Just to clarify a little.

You already have a skid steer quick attach on you 110 TLB. All you need is a bale spear with a standard skid steer QA mount and you are good to go.

I wouldn't lift them with the bucket. The round bale is large and bulky and can roll over the back edge of the bucket and come right down in your lap. This will ruin your lap for quite a while...

 

[jenkinsph]

I have unloaded several truck loads with my 110 using a bale spear. No big deal.

 

[AKfish]

Just to clarify a little.

You already have a skid steer quick attach on you 110 TLB. All you need is a bale spear with a standard skid steer QA mount and you are good to go.

I wouldn't lift them with the bucket. The round bale is large and bulky and can roll over the back edge of the bucket and come right down in your lap. This will ruin your lap for quite a while...

Thanks, Dave. I really meant SS QA on the spear... wasn't real clear, though.

AKfish