Iseki SGR19 Wiring/Lighting help

[warrenstocks]

Just bought a second hand Iseki SGR19 which I need some help with the electrics.

There are two versions of the SGR19: One which can be operated on the road which has lighting installed & one for off road only use which has no lights fitted.

I presume both tractors share a common loom (??) so does anyone know where I can hook the lighting & switches up to as having a good poke around I see that there are loads of unused multi connectors all over the place?

Many thanks

Warren

 

[ampa]

If there are any unused loomed wires that are connected to the accessory side of the ignition switch your good to go, if no wire is present then install some red/black 14 gauge wire with fuse connectors from accessory side of ignition switch(should read acc on the back of the ignition switch, then add the toggle switches ,I used a single toggle switches for my back up light and a single toggle for the taillights as well as a single toggle for my front headlights, my tractor only had one working headlight and an old backup light when I first bought it,I sometimes had to drive on the city street where I used the tractor for clearing snow,I also installed a yellow magnetic strobe light on the hood as well, and all these added lights each have their own single toggle switch.....hope this is the info your needin'......Take care....Ampa