chupacabra
Bronze Member
Does anyone have any idea where to get these parts?
Ignition switch and the small warning light for oil, charge,and water temp,
- Thread starter chupacabra
- Start date
- Views: 1529
Ilikeurtractor
Veteran Member
- Joined
- May 16, 2011
- Messages
- 1,070
- Tractor
- Iseki TX1300F/TX1500/ TX2160F/TS2220F/ Satoh S370D/S373D
What model of tractor? Do you mean the bulbs, or the whole light assemblies?
OP
chupacabra
Bronze Member
Sorry, forgot the important details.
I have the Iseki 1300tx. I am talking about the individual receiving gauges that are stuck in the dashboard. I need 2 of them.
I have the Iseki 1300tx. I am talking about the individual receiving gauges that are stuck in the dashboard. I need 2 of them.
NHmitch
Platinum Member
I had to replace mine as well, the bulbs are pretty easy, you can get them on eBay, or on line 12v 3.4 w, These are the bulbs you nee that fit in the warning light, Brand New 12 V-3.4 W Ba 9s Parking/Turn Pilot Speedo Bulb For Royal Enfield | eBay
If you need the red cover for the dash warning light, then I bought mine from Bolens parts. They are not cheap, somewhere in the $20 range for an assembly. Hope this helps.
This is the assembly that I had to replace from sams bolens:
If you need the red cover for the dash warning light, then I bought mine from Bolens parts. They are not cheap, somewhere in the $20 range for an assembly. Hope this helps.
This is the assembly that I had to replace from sams bolens: