Price Check I got a price 4720

DDT · Oct 21, 2004

I got a price. 4720 4x4,hydro ag tires, power beyound & 2 mid & 2 mid scv. 31884.00
400X loader QT bucket 4628.00
Discounts 1042.00
total 35470.00
This does not include brackets for my 48 hoe to switch from my 4400. ADD $600
My trade 01 4400,4x4, 2 mid & 2 rear scv,power beyound. 1300 hrs. good tractor. 14650
GB 260 Loader, HD QT bucket 2400
model 74 front blade, VG con. 800
total 17850
trade diff 17620
I am disapointed. I may go look at Kubota cab models.
He don't want my cab
What do you all think, The shaft comes to mind.

yellowsocks93 · Oct 22, 2004

I would say the price he gave you for your old machine was about reasonable. 35 grand for the new machine seems like a lot. Man my dad got his 5320 with cab for cheaper. I don't know dealer cost on them but I can probably see tomorrow at work.

cowboydoc · Oct 22, 2004

He's being more than fair on the trade but it's just like a car salesman they make it up on the new one. In the end whatever the number look like they give you wholesale on your trade.

I had priced out the 4720 with a loader for around $27k I think. I'll have to look back at my #'s for sure. Just looked and it was $26,180 for the base 4720 and 400 loader.

DDT · Oct 22, 2004

The 4720 you priced, was it the same setup as this one? Your 26.2 is a long ways for 35.5. I did want R-1 tires but that save a little for the extra SCV on the rear. /forums/images/graemlins/confused.gif

DDT · Oct 22, 2004

I would like to know what a 5320 goes for. Sure makes me wonder if were going to be ginny pigs on the 20's like the 00 & 10's. Any speculation on repairs.

yellowsocks93 · Oct 23, 2004

We still have the 2 original 20 series we got in when they first came out. Hopefully we sell them before winter. I had no time today to get prices I was on the road. Maybe next week.

DDT · Oct 24, 2004

I will try to sell my tractor first.
4400 15000
loader 2500
front blade 1500
Hard cab 1500
#48 Hoe 5000
Total 25500
Does this sound like a sellable deal? too low/ high I think I would get a better price out right.Comments are wecolme.
I got a list price from JD web site. If I did it right 38400 for the same but no cab.

yellowsocks93 · Oct 24, 2004

I sold my 2001 4300 gear with 60 mid mount 7 iron for 13,300 with only 120 some hours. I don't think you will get 15 k for you machine with those kind of hours. I would lower you prices big time.

DDT · Oct 25, 2004

I have my 4400 spoken for, but he just wants the tractor and loader. I have to find homes for the model 74 front blade and my cab. If I go with a JD my hoe will work, but leaning toward kubota for the factory cab. How hard is it to sell a #48 back hoe just in case?

chowl · Oct 25, 2004

My price was:
4720 4x4, E-hydro, R-4 tires and rear scv for backhoe - $25,275.00

400x Loader with 73inch Heavy Duty Bucket - $3,700.00

448 Backhoe with 12inch Bucket - $6,700.00

Total - $36,000.00
Less rebate - $650.00
Less Imp bonus - $300.00
Less EAA discount - $250.00

Grand Total - $34,800.00

Is this a good price?

Les

yellowsocks93 · Oct 26, 2004

I could not tell you on the hoe. I have never seen one at my place come in on trade. I don't even think we have sold a new one. My guess it might be kind of hard to sell it seperately because it is a speciality item and financing is still pretty good on new stuff.

DDT · Oct 26, 2004

That is a good price compared to mine. I called the dealer and told him to refigure no trade, I also told him I was looking at another color.

zipp669 · Oct 26, 2004

Hi all! I am a newbie here!
Have been reading and researching this site and has really helped.
Been pricing a 4720 with 400 loader, r4's, dual mid & 1 rear scv, front grill guard. My price for this is $29250. the list price was somwhere around $34000-36k.
CHOWL-my dealer list on the loader with 73" bucket was $4400. you are getting a backhoe with your setup for the price I am getting without. I just priced this this afternoon!! Also the list sheet I have that he faxed to me listed the 4320 base machine at $25252.00, add $1000 for e hydro, $340 for scv's, for $26646 list & sale is $22950 with no loader
Cowboy doc, please tell me where you got your price & I will be theree instantly.
Also pricing a 4320, loader & the rest is same as 4720. list on this is $31545 & I can have for the low price of $26600.

My other price is a new holland TC45DA, supersteer, 16la loader,grill guard, r4's 2mid & 2 rear scvs. sale price is $26200.

I think I am getting the shaft on my 4720. HELP. I am getting other quotes & this same salesman sold me in SEPT my 5205 & in 2001 my 4500.
This wont be my 1st tractor. If I can figure it out I will make a profile.
also I am planning on selling 3 tractors & geting 2 new ones.
can go into that later
If I rambled I am sorry. so much I want to say. I am going to verify this all again tomorrow as I am a numbers guy. Also am waiting on another quote.

thanks ZIPP

BigGary · Oct 27, 2004

Zipp, I paied $38,500 for my 4320 with a four in one loader bucket and MX-6 mower.
The mower was $2250 and the four in one was $1500 over the heavy duty bucket. So without these extras the deal was at $34,750. I got the E-hydro and all the extra hyd. to run the hoe (448) and four in one. Hope this helps.

Dutch445 · Oct 27, 2004

DDT,
IMHO, your 4400, with backhoe, blade, cab sounds to me like it's about $19,500. You said it was a GB loader, and it has 1300 hrs. A lot depends on condition, and your market. Super nice, in a good market could bring over 20, but I don't see 23-25 for it. again, just my opinion.
If you are pricing items to sell seperately, maybe you could get more. That involves a lot of time removing equipment, and making sure all included parts go with the cab, backhoe, etc.
Good Luck!
/forums/images/graemlins/cool.gif

michiglenn · Oct 27, 2004

I did some shopping on my 4320 before settling on a dealer that I liked the best. On any 20 series tractor with tools the price was within a couple hundred dollars. In the end 15% was bottom for every dealer. Maybe that is regional, but I haven't heard prices any different on a bought unit. You can definitely get a higher percentage off buying a 10 series. I figured in 20 years I will forget the price, but I will still have the tractor. Over the years I have never regretted paying more for exactly what I wanted. I sometimes would get a great "deal" (price) on a lesser desired item and soon after end up later buying what I really wanted in the first place.

DDT · Oct 27, 2004

Thanks for your input. A freind of mine wants my 4400 and loader, So that part is out of the way so to speak. I will need to find prices for # 74 front blade, cab and possibly back hoe.
I am thinking but might be all wet, I have so far and thats OK I don't buy and sell every day. Is the blade and cab worth 1500 each? hoe 5K??
What do you think.

Dutch445 · Oct 27, 2004

The cab, should be 1500 , the blade, that's a tough one. We hardly ever sell them, and the one I did sell, is out back someplace because the guy wants us to sell it. (he didn't like the way it mounted)
I can't even guess what you could get for that. 1500 sounds high, but depends on who you find that wants one i guess.
The hoe, 5k isn't unreasonable if it's nice. There are some on dealer websites for similar money. The advantage you have is to be able to remove the equipment yourself, and not have to pay a shop to do it. That makes it more feasable than if I was doing the same thing and having to reinstall the attachments on another tractor.

/forums/images/graemlins/cool.gif