Slamfire
Veteran Member
We pulled 2-14" bottoms for years with an 8N Ford. It might have weighed a bit more, but didn't have 4wd or even a locking differential.
How big of a plow can a JD 755 pull?
- Thread starter Von
- Start date
- Views: 7917
-
- Tags
- john deere 755
KubotaBling
Silver Member
Yah i agree with that but a 8N is alot bigger than 20hp-25hp and weights more than 2K pounds though at 70% split you'd have more weight on rear than the whole smaller tractor weighting in at 1700 or so#. My neighbor and papaw has a 8N and also pulls a 2 bottom plow. A 1 bottom plow with a 20-25hp is it i think around here.
PeterT
Bronze Member
If I am not mistaken an 8N was only 24hp. Correct me if I am wrong. Thanks PeterT
Slamfire
Veteran Member
I think my 18 hp (pto) mitsu puts more power on the ground than my Dad's 8N did. And there wasn't much difference in the engine's output either.
KubotaBling
Silver Member
I was simply using the hp as a measure of tractor size any tractor will pull a plow at a lower gearing vs normal plowing gearing if power became an issue. You all must live on a topsoil farm cause it takes some major kubota juice up here to get thru the hard pans.