hour meter not working

natem · Nov 11, 2007

Just got the new ck20s with the digital hour meter, and I have run the tractor for several hours at high and low rpms, and it still says one hour, has anyone had this problem?? I am thinking that some wire some where is not connected.

pepe · Nov 14, 2007

hi natem
you have 1 wire with terminal near brake pedal on the wire harness i tink its red i foud 1 unplug last mont

pepe · Nov 14, 2007

hi natem.
check on the wire harness near the brake pedal you foud a wire with terminal
i tink its red i found 1 unplug last month sorry for my english but i'm a frenchmen

wallace · Nov 15, 2007

Hmmm I wish my hour meter would stop working then I could stay young forever

Anyhow did you find your problem yet?

natem · Nov 16, 2007

No, not yet. I looked for that wire and found a red wire with a plug dangling under the drive pedal on the right side but there was nothing to plug it into.
So off to the dealer it went today, they took a good look at it while i was there and could not find anything, so i had to leave it. We will see??

pepe · Nov 19, 2007

the wire is not under the drive pedal is over on the wirering harness and the conector is (taped) with the black electrical tape the conector looks conect but is unplug if you not foud i send you a picture if you need

natem · Nov 20, 2007

It is at the dealer, they called today and told me that they had to order a new dash for it. What a bummer not to have the tractor for this nice long holiday weekend. Thanks though

pepe · Dec 1, 2007

i'm a mechanics on kioti dealer in quebec canada since 20 years and i find the same problem on ck20s last month and the probleme its a wire .

natem · Dec 3, 2007

The hour meter is still not working the dealer had to order a new dash, they said that was the problem. They had to get the part from Korea and it was going to take a week and a half to two weeks so i went and picked it up to use it in the mean time. I am going to take a serious look at it this week, and if i find that it is the wire, it wont look to good for the dealer. I could use a pic if it is not a big hassle to post one. Thanks